Herefordshire · England
Bath Re-enamelling for Lucton homes
Full bath re-enamelling and resurfacing in Lucton, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- An outdated colour you’d like to change
- Staining under the taps and around the waste
Bath re-enamelling in Lucton, done in place
We don’t move the bath, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, and can be used again the day after. Our technicians work on acrylic baths, pressed steel baths and Victorian roll-tops, and common reasons people get in touch are wear marks under the taps and stains that won’t shift.
Big or small, you get the same one-year guarantee in Lucton and across Herefordshire.
- Area
- Lucton (HR6)
- Region
- Herefordshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
When a repair is not the answer
A few problems are outside what a surface repair can do:
- A bath that is rusted through
- Acrylic that moves when you stand in it
- Leaks from fittings rather than the bath
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
Repair or replace: which is better?
Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Resurfacing renews the whole surface with the bath left where it is. Prices start from £350. We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- A fixed quote before booking
- CHAS and Constructionline accredited
- Everything repaired in place
- Colours mixed by hand to suit your surface
Take a look at our full price list or guide to resurfacing and replacement costs.
How the visit works
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes a full day. At the end we talk you through how soon it can be used and how to care for it.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Tell us about any previous repairs or coatings
- Have a window or extractor fan available
How to get a price
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Advice
Landlord and trade work in Lucton
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
We work for landlords, letting agents and housing providers in Lucton as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Also in Lucton
How to look after the repair
Once the work has cured, treat it gently:
- Keep suction mats out of the bath
- Wash away dyes and oils after use
- Respect the curing time we give you
- Store bottles off the bath
Wipe the bath dry after use where you can, and rinse off any bath products.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
How we price bath re-enamelling
Prices start from £350. A fixed quote means you know the cost before you book. We look at:
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
- How much damage there is
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Quotes from your pictures
The better the pictures, the more accurate the price. Here’s what helps:
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
- A wider photo showing the entire bath
- Whether it’s been repaired or coated before
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
What we’re called out for in Lucton
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
The things clients typically mention when they call include:
- Brown or grey marks that do not clean off
- Enamel that’s lost its shine and feels rough
- A period or roll-top bath worth keeping
- Chips and rust in more than one place
What to look for in a quote
- Whether cleaning and preparation are in the price
- What happens if the damage is worse than the photos show
- Whether they match the colour on site
- Whether there are any call-out or travel charges
Lucton and nearby
Lucton is about 16 miles north of Hereford, in Herefordshire. Book a date that suits you, and we will give you an arrival time in advance, so you are not left waiting in all day. Lucton is one of 255 places in Herefordshire we cover. We work right across the region, from Lucton to Birmingham (42 miles away).
Jobs in HR6 are booked in the same way as anywhere else. From Church Road, St Peter's Square and Lucton Lane or a nearby road, a technician can come to you. If you are just outside Lucton, we cover Aymestrey (1 mile north-west), Mortimer's Cross (1 mile south-west), Kingsland (2 miles south), Cobnash (2 miles south) and Shobdon (3 miles south-west). We also work in nearby towns such as Leominster (5 miles south-east), Whitecross (15 miles south), Widemarsh (15 miles south), Bromyard (14 miles south-east), Kington (10 miles south-west) and Aylestone Hill (15 miles south).
What’s near Lucton
Typical jobs here are in homes near Mortimers' Cross Inn and Church of St John the Baptist and St Alkmund and the streets around them. Further afield, we also cover the area around Croft Castle (1.1 miles north-east). For a walk, there’s Dionscourt Hill.
Lucton: your questions answered
Do you cover Lucton?
Yes. We cover the whole UK and travel to Lucton and the rest of Herefordshire. Send pictures and we’ll quote, or call 0345 017 0787.
What happens after I send photos?
We review the photos and send a fixed quote with dates.
Do you cover the whole of Herefordshire?
Across the UK. Prices don’t change with location.
Is there a smell?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
Are there extra charges for Lucton?
We do not add a call-out fee. The fixed price covers the visit and the work.
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Can you change the colour of my bath?
Yes, most people go for white. Mention the colour you want when you send pictures.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
About our accreditations · Every repair comes with a one-year guarantee.
