Herefordshire · England
Bath re-enamelling & resurfacing in Kingsland, Herefordshire
Damaged bath in Kingsland? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
About our bath re-enamelling in Kingsland
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We’re frequently asked to fix a period or roll-top bath worth keeping and wear marks under the taps, on acrylic baths, basins & shower trays and pressed steel baths.
You get a one-year guarantee, the same in Kingsland as everywhere else we work.
- Location
- Kingsland (HR6)
- County
- Herefordshire
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Signs you need bath re-enamelling in Kingsland
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
These are the problems we are asked about most:
- An outdated colour you’d like to change
- A roll-top that is seen better days
- A bath that stays dull however much you clean it
- A peeling or bubbling previous coating
Comparing quotes
- When it can be used again
- If travel is included in the price
- What happens if the damage is worse than the pictures show
- Aftercare advice
Aftercare tips
Aftercare is simple:
- Dry the bath after use to stop limescale
- Respect the curing time we give you
- Have chips seen to early
- Use washing-up liquid and a soft cloth
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
Nearby places to Kingsland
Other services in Kingsland
About Kingsland
Kingsland is about 14 miles north of Hereford, in Herefordshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Our technicians cover all 255 towns and villages in Herefordshire, from the larger towns to small villages. We work right across the region, from Kingsland to Birmingham (about 42 miles away).
We cover every part of the HR6 postcode area and the streets around it. We regularly work on streets such as Lugg Green Road, Boarsfield and Mortimer Meadow. Close by, we cover Cobnash (1 mile south-east), Shirl Heath (1 mile south), Mortimer's Cross (2 miles north-west), Lucton (2 miles north) and Aymestrey (2 miles north-west). Within a short drive, we also cover Hereford (14 miles south), Leominster (4 miles south-east), Redhill (15 miles south), Newton Farm (15 miles south), Whitecross (14 miles south) and Eign Hill (14 miles south).
What’s near Kingsland
Around Kingsland, we work in homes near Church of St Michael, Kingsland CofE School and Corners Inn, among other places. Kingsland’s nearest station is Leominster station, roughly 3.9 miles south-east of the centre. Nearby you’ll also find Kingsland Castle (less than half a mile south). The countryside around Kingsland includes Dionscourt Hill.
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Questions from Kingsland
What happens once I’ve sent pictures?
You’ll get a fixed quote back, generally with dates to choose from. There’s no obligation to book.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Send pictures of everything together and we will quote them together.
Is there a smell?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
When can you do it?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Which areas do you work in?
Across the UK, and that includes Kingsland. Our prices are the same everywhere.
I rent my home. Can I book you?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day.
Can I get a quote without a visit?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
The process
Your technician turns up when we said we would and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. The work itself takes the best part of a day, and we leave the room as we found it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
Before we arrive
- Mention any earlier repairs or resurfacing
- Have somewhere for us to park nearby if possible
- Move bottles, mats and clutter away from the area
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Advice
Repair or replace: which is better?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Prices start from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- One-year guarantee on every repair
- Colours mixed by hand to suit your surface
- A fixed quote before you book
- CHAS and Constructionline accredited
See our pricing and bath cost comparison.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
What we can’t put right
In fairness, there are a few things a repair won’t fix:
- An acrylic bath that flexes badly underfoot
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we work on in Kingsland
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
How we price bath re-enamelling
Prices start from £350. Prices are worked out job by job, from your pictures. The main factors are:
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- What the surface is made of
- Whether we combine several jobs
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.
How to get a fixed price
Two or three clear photos are usually enough. Try to include:
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote without visiting.
About our accreditations · Every repair comes with a one-year guarantee.
