Shropshire · England
Bath re-enamelling & resurfacing in Bache Mill, Shropshire
Bath re-enamelling in and around Bache Mill: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Stains that won’t shift
- A coating lifting around the plughole
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- A cast iron or steel bath that is cracked right through
- Steel that has corroded right through
- Acrylic that moves when you stand in it
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Bache Mill
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
How we handle bath re-enamelling in Bache Mill
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. We’re often asked to fix a bath in a colour that no longer suits and worn patches where water runs and sits, across basins & shower trays, Victorian roll-tops and pressed steel baths.
Every repair is covered by our one-year guarantee, wherever you are in Shropshire.
- Area
- Bache Mill (SY7)
- County
- Shropshire
- Cover
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What happens on the day
We agree an arrival time beforehand, so you know when to expect us. On site, it takes a full day for most jobs. We leave the room clean and ready to use once it has cured.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can normally be used the day after.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Tell us about parking, stairs or access
- Point us to the nearest place to park
How to get a price
Send us a photo of the damage and one of the whole item, and tell us you’re in Bache Mill, and we will reply with a fixed price.
Read more
Can I fix it myself?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
What we’re called out for in Bache Mill
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Customers typically contact us about:
- A peeling or bubbling previous coating
- Staining under the taps and around the waste
- A period or roll-top bath worth keeping
- Lots of chips and rust spots
Before you book anyone
- How long it needs to cure
- What happens if the damage is worse than the pictures show
- How the colour is matched
- A fixed quote, and whether VAT is included
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
How to care for the repair
Much of the damage we repair could have been avoided. These habits help:
- Leave the bath for the full curing time before using it
- Stick to gentle, non-abrasive cleaners
- Keep toiletries on a shelf rather than in the bath
- Rinse off hair dye, oils and bath bombs right away
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Prices and what affects them
Resurfacing from £350. You will know the full cost before you book. We look at:
- The size and number of damaged areas
- How easy the damage is to reach
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Send photos for a quote
We price nearly every job from pictures. This is what we need:
- The material, if you know it
- The postcode, so we can plan the visit
- A picture taken from further back
- Daylight if possible, and no flash reflection
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
Bache Mill and the surrounding area
Bache Mill is about 6 miles north of Ludlow, in Shropshire. Our technicians come to homes and businesses in Bache Mill and nearby villages, so nothing has to leave your home. Bache Mill is one of 433 places in Shropshire where we work. You can also see our page for Birmingham, about 35 miles away.
Postcode districts we cover here: SY7. We also cover the places around Bache Mill: Diddlebury (1 mile north), Seifton (2 miles south-west), Munslow (2 miles north-east), Hayton's Bent (3 miles south) and Eaton (3 miles north). We also work in nearby towns such as Bridgnorth (14 miles east), Ludlow (6 miles south), Broseley (15 miles north-east), Church Stretton (6 miles north-west), Bayston Hill (15 miles north) and Craven Arms (5 miles west).
What’s near Bache Mill
Around Bache Mill, we work in homes near Corvedale CofE Primary School and Church of St Peter. Bache Mill’s nearest station is Craven Arms station, about 4.7 miles west of the centre. Further afield, we also cover the area around White House Museum of Buildings And Country Life (1.2 miles north) and Corfham Castle (1.2 miles east). For a walk, there is Callow Hill.
Places near Bache Mill
Also in Bache Mill
Common questions in Bache Mill
Can you re-enamel a roll-top bath?
Yes, often. We resurface the inside, and the outside can be refinished too.
Can you repair something that is been repaired before?
Yes, we frequently do. Removing the old work can add time, and that’s in the quote.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Can pets and children be at home?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
When can you do it?
That depends on our diary for your area. We will offer you dates when we send your quote.
How do I book?
Send photos through the quote form or call 0345 017 0787, and we will take it from there.
Landlords, agents and businesses in Bache Mill
For anyone letting property in or around Bache Mill, we can repair and quote for several addresses together. Send pictures for each one and we will price them together.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
About our accreditations · Every repair comes with a one-year guarantee.
