Shropshire · England
Bath Repair in Bache Mill
Chip and crack repairs to enamel, acrylic and cast iron baths in Bache Mill, carried out at your home and guaranteed for a year.
- Repairs from £95
- Rust spots around the plughole
- An old repair that has yellowed or come loose
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- If an acrylic bath flexes, have its feet adjusted
- Do not leave a fresh chip for long
- Keep abrasive pads and gritty cleaners away from the bath
- Don’t leave razors or cans standing in the bath
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
About our bath repair in Bache Mill
Whatever the damage, the aim is the same: a repair that is smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. If you’re dealing with a cracked acrylic bath and chips under the taps, we can generally put it right, whatever the material.
We stand behind the work with a one-year guarantee.
- Location
- Bache Mill (SY7)
- Area hub
- Shropshire
- Guarantee
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Nearby places to Bache Mill
Other services in Bache Mill
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
What a repair cannot fix
A repair isn’t always the answer, and we will tell you before we start. We can’t fix:
- A bath that moves underfoot, until its support is fixed
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Cracks in acrylic we cannot reach from underneath
If in doubt, send photos and we will say what we think before booking.
What we work on
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
What affects the price in Bache Mill
Prices start from £95. Each job gets its own fixed price. This is what makes a difference:
- Doing more than one item at once
- The material
- What kind of damage it is
- How much damage there is
A repair usually costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Send photos for a quote
Good pictures mean an accurate price. Here’s what we find most useful:
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
- A coin or ruler next to the damage for scale
- What it’s made of, if you know
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and you’re under no obligation.
Signs you need bath repair in Bache Mill
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Fittings cause damage too: water sits around them, and any chip there soon rusts.
Send us a picture if you notice any of these:
- A hole punched through by something heavy
- A kit repair that didn’t last
- A chip where the taps sit
- Chips along the edge of the bath
Before booking anyone
- Who will actually do the work
- Is the price fixed, and does it include VAT?
- Whether the colour is mixed to match
- How the room is protected while they work
How it works
We agree an arrival time beforehand, so you’re not left guessing. Once we are there, the work takes a few hours for most jobs. We leave the room clean.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Ensure the area is dry
- Tell us about parking, stairs or access
- Move bottles, mats and clutter away from the area
Getting a price
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Read more
Bache Mill and nearby
Bache Mill is about 6 miles north of Ludlow, in Shropshire. Our repair technicians come to clients in Bache Mill, so there’s no workshop to go to. Bache Mill is one of 433 places in Shropshire we cover. We work right across the region, from Bache Mill to Birmingham (35 miles away).
All of SY7 is covered. We also cover the places around Bache Mill: Diddlebury (1 mile north), Seifton (2 miles south-west), Munslow (2 miles north-east), Hayton's Bent (3 miles south) and Eaton (3 miles north). Larger places within reach include Bridgnorth (14 miles east), Ludlow (6 miles south), Broseley (15 miles north-east), Church Stretton (6 miles north-west), Bayston Hill (15 miles north) and Craven Arms (5 miles west).
Local landmarks in Bache Mill
Our clients here include homes close to Corvedale CofE Primary School and Church of St Peter and the streets around them. Bache Mill’s nearest station is Craven Arms station, roughly 4.7 miles west of the centre. Well-known places in the area include White House Museum of Buildings And Country Life (1.2 miles north) and Corfham Castle (1.2 miles east). The countryside around Bache Mill includes Callow Hill.
Your questions about bath repair in Bache Mill
Can I get a quote without a visit?
Typically, yes. A close-up and a wider photo are enough to give a fixed price.
Can pets and children be at home?
Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.
What happens next?
You will get a fixed quote back, plus dates. You are under no obligation.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
How do I book?
Use the quote form or ring 0345 017 0787, and we’ll do the rest.
Can you repair something that is been repaired before?
Generally, yes. Let us know what was used before.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.
Can you repair a hole in a bath?
Frequently, if there’s access underneath. The hole is backed, filled and refinished to match.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, in much the same way.
About our accreditations · Every repair comes with a one-year guarantee.
