Shropshire · England
Bath Re-enamelling in Munslow
We travel to Munslow for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- A coating lifting around the plughole
- Staining under the taps and around the waste
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Bath re-enamelling in Munslow, done in place
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. We regularly repair acrylic baths, basins & shower trays and Victorian roll-tops, and people most frequently call us about thin, worn enamel in places and a dull, rough surface that won’t come clean.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Area
- Munslow (SY7)
- Area hub
- Shropshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How the visit works
On the day itself, there’s little for you to do. Let us in and show us the room, and we’ll take it from there. Most visits take a full day.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Tell us if there are stairs or a lift
- Move bottles, mats and clutter away from the area
- Let the surface dry out before the visit
How to get a price
Email us photos of the damage and a wider shot of the whole item, and tell us you’re in Munslow, and we will come back with a fixed quote.
Read more
Towns and villages near Munslow
What else we do in Munslow
Munslow and nearby
Munslow is about 12 miles west of Bridgnorth, in Shropshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Munslow is one of 433 places in Shropshire we cover. Our nearest city page is Birmingham, about 34 miles away.
Here we cover the SY7 postcode area. We also cover the places around Munslow: Diddlebury (2 miles south-west), Bache Mill (2 miles south-west), Eaton (2 miles north-west), Rushbury (3 miles north) and Wall under Heywood (3 miles north). We also work in nearby towns such as Madeley (15 miles north-east), Bridgnorth (12 miles east), Coleham (15 miles north), Ludlow (8 miles south), Belle Vue (15 miles north) and Sutton (14 miles north).
What’s near Munslow
In Munslow, that means homes near Crown Inn Public House and Church of St Michael and the streets around them. Further afield, we also cover the area around White House Museum of Buildings And Country Life (0.9 miles south-west) and Broncroft Castle (1.5 miles east). Open spaces near Munslow include Callow Hill.
Honest limits
Before you book, it’s worth knowing the limits too:
- A bath split right through the body
- Plumbing leaks, which need a plumber
- Acrylic that moves when you stand in it
Send us photos and we’ll tell you honestly.
Materials we work on in Munslow
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
Aftercare tips
Looking after the surface is easy:
- A dripping tap should be fixed promptly
- Stick to gentle, non-abrasive cleaners
- Do not leave bottles, razors or sponges standing on the surface
- Dry the bath after use to stop limescale
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
How we price bath re-enamelling
Prices start from £350. There’s no charge for travel to Munslow. The price depends on:
- Previous DIY repairs that have to come out
- Doing more than one item at once
- Access to the area
- Unusual colours or finishes
There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from photos
Two or three clear photos are normally enough. Try to include:
- The material, if you know it
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
- Your postcode, so we can check dates
If you are in Munslow and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Repair or replace in Munslow?
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Why book with us
- No extra charge for your area
- We come to you, anywhere in the UK
- Straight answers about what a repair can do
- Colour-matched on site
See our prices page or resurfacing vs replacement cost guide.
Common questions in Munslow
Do you work in Munslow?
Yes, we do. Technicians travel to Munslow from across the region, with no extra charge for travel.
What if the damage is worse than the photos show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Can you redo someone else’s repair?
Typically, yes. The old repair comes out first, so mention it when you send pictures.
Can you re-enamel a roll-top bath?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Signs you need bath re-enamelling in Munslow
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, normally first under the taps and around the waste.
Common reasons people in Munslow contact us include:
- A bath that stays dull however much you clean it
- A bath in a colour that no longer suits
- A period or roll-top bath worth keeping
- A peeling or bubbling previous coating
Questions to ask before you book
- What prep work is covered
- How your room will be protected
- Is the price fixed, and does it include VAT?
- What the guarantee covers, and for how long
About our accreditations · Every repair comes with a one-year guarantee.
