Shropshire · England
Bath re-enamelling & resurfacing in Eaton, Shropshire
Fixed-price bath re-enamelling in Eaton and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- An old resurfacing that is failing
- Several chips and rust patches
About our bath re-enamelling in Eaton
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. We regularly repair acrylic baths, basins & shower trays and Victorian roll-tops, and common reasons people get in touch are thin, worn enamel in places and a bath in a colour that no longer suits.
You get a one-year guarantee, the same in Eaton as everywhere else we work.
- Location
- Eaton (SY6)
- County
- Shropshire
- Cover
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairing versus replacing in Eaton
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
What you get with us
- One price list for the entire UK
- A fixed quote before you book
- Everything repaired in place
- Work done at your home or business
See our prices page and bath cost comparison.
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
How the visit works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes a full day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Ensure the room can be ventilated
- Avoid using the area for a few hours before we arrive
- Tell us if there are stairs or a lift
Ask for a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
Common problems we fix in Eaton
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
Get in touch if you’ve noticed:
- A period or roll-top bath worth keeping
- A bath that stays dull however much you clean it
- A coating lifting around the plughole
- A bath in a colour that no longer suits
What your quote should include
- Who will actually do the work
- How the room is protected while they work
- Whether the price covers travel
- Whether the price is fixed and includes VAT
What we can’t put right
It helps to know what we can’t do:
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
- Plumbing leaks, which need a plumber
Send us photos and we will tell you honestly.
Materials we work on in Eaton
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
Eaton: your questions answered
Is my repair covered?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Is there any odour?
Expect a mild smell while we are working that clears as it cures.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
Do you work in Eaton?
Yes. We cover the whole UK and travel to Eaton and the rest of Shropshire. Send pictures and we will quote, or call 0345 017 0787.
Can I get a quote without a visit?
In nearly every case. If pictures don’t show enough, we’ll ask for another angle.
How do I get a price for bath re-enamelling in Eaton?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
What affects the price in Eaton
Resurfacing from £350. We price every job individually. The main factors are:
- The type of damage
- How many items we do on one visit
- The material
- How easy the damage is to reach
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Quotes from your pictures
Photographing the damage takes a minute, and it saves a visit. Please include:
- Good light, ideally daylight, without flash glare
- A picture taken from further back
- Details of any past repairs
- Something in shot to show the size
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We will tell you honestly whether it can be repaired.
Eaton and nearby
Eaton is about 14 miles west of Bridgnorth, in Shropshire. We agree a date that works for you, and we will give you an arrival time in advance, so there is no waiting around. Our technicians cover 433 places across Shropshire. You can also see our page for Birmingham, about 36 miles away.
Every address in SY6 is covered, from the main roads to the quietest streets. Other places close to Eaton include Rushbury (1 mile north-east), Wall under Heywood (2 miles north-east), Hope Bowdler (2 miles north-west), Gilberries (3 miles north-east) and All Stretton (4 miles north-west). Within a short drive, we also cover Shrewsbury (14 miles north), Madeley (15 miles north-east), Bridgnorth (14 miles east), Coleham (14 miles north), Ludlow (10 miles south) and Kingsland (14 miles north).
Around Eaton
In Eaton, that means homes near St Edith's Church and the streets around them. For rail, the closest station is Church Stretton station, roughly 3.3 miles north-west of the centre. Further afield, we also cover the area around White House Museum of Buildings And Country Life (2.3 miles south-east) and Brockhurst Castle (3.4 miles north-west). Open spaces near Eaton include Caer Caradoc.
Also in Eaton
How to care for the repair
Looking after the surface is easy, and it makes a real difference:
- Do not leave bottles, razors or sponges standing on the surface
- Get any chip repaired quickly
- Stick to gentle, non-abrasive cleaners
- Leave the bath for the full curing time before using it
Dry the bath after use if possible, and rinse away any product left on the surface.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
About our accreditations · Every repair comes with a one-year guarantee.
