Staffordshire · England
Bath Re-enamelling for Baldwin's Gate homes
Bath re-enamelling for Baldwin's Gate, without a refit. Send us pictures for a fixed quote, then book a visit.
- Resurfacing from £350
- A roll-top that is seen better days
- Worn patches where water runs and sits
What affects the price in Baldwin's Gate
Resurfacing from £350. We charge the same across the UK, including Baldwin's Gate. The price reflects:
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
- Any earlier repairs that need removing first
- The material
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before you book.
Send photos for a quote
The better the photos, the more accurate the price. Here’s what helps:
- A photo taken from further back
- A coin beside the damage so we can judge size
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
Upload pictures of the damage and a wider shot of the whole item, and tell us you’re in Baldwin's Gate, and we’ll reply with a fixed quote.
Bath re-enamelling at your home in Baldwin's Gate
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. Typical jobs include chips and rust in more than one place and a coloured bath you want in white, on Victorian roll-tops, basins & shower trays and pressed steel baths.
All our work is covered by our one-year guarantee, wherever you are in Staffordshire.
- Area
- Baldwin's Gate (ST5)
- County
- Staffordshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Baldwin's Gate: your questions answered
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room protected and ventilated.
What information do you need?
Photos of the damage, a photo of the entire bath and your postcode. Then we will agree a date.
How durable is a resurfaced bath?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
What happens if you find more damage?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Is it safe with children and pets around?
Just keep them out of the work area. We will let you know when it’s safe to use again.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
Signs you need bath re-enamelling in Baldwin's Gate
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
If you can see any of these, send us a picture:
- A roll-top that’s seen better days
- Chips and rust in more than one place
- A peeling or bubbling previous coating
- Brown or grey marks that do not clean off
Comparing quotes
- If travel is included in the price
- What prep work is covered
- Whether a trained technician does the job
- How to look after the finish
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
What a repair cannot fix
Not everything can be repaired, and we would rather say so up front. We can’t fix:
- Damage hidden under a previous coating, until it’s stripped back
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
Towns and villages near Baldwin's Gate
More services for Baldwin's Gate
Baldwin's Gate and nearby
Baldwin's Gate is about 5 miles south-west of Newcastle-under-Lyme, in Staffordshire. Whether you are in the middle of Baldwin's Gate or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover 512 places across Staffordshire. You can also see our page for Manchester, about 36 miles away.
All of ST5 is covered. We regularly work on streets such as Tollgate Avenue, Meadow Way and Field Close. Other places close to Baldwin's Gate include Madeley Park (1 mile north-west), Maer (1 mile south), Aston (3 miles west), Ashley (3 miles south-west) and Onneley (3 miles north-west). Further out, we also cover Stafford (13 miles south-east), Newcastle-under-Lyme (5 miles north-east), Longton (8 miles east), Stone (8 miles south-east), Leek (15 miles north-east) and Biddulph (12 miles north-east).
Local landmarks in Baldwin's Gate
Around Baldwin's Gate, we work in homes near Church of St Mary and All Saints and Baldwins Gate CofE(VC) Primary School, among other places. Further afield, we also cover the area around NHS North Staffordshire Clinical Commissioning Group (4.8 miles north-east) and Castle Hill (2.5 miles south-west).
How the visit works
Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we’re doing. It normally takes most of the day, and you can get on with other things while we are there.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Keep pets and children out of the room while we work
- Tell us if there are stairs or a lift
- Point us to the nearest place to park
Get a quote
To get a price, send two or three photos using our quote form or call us. We will say straight away whether it can be repaired.
Related advice
Can I fix it myself?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Should you replace it?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why book with us
- Colours mixed by hand to suit your surface
- Every repair guaranteed for a year
- We will tell you if it’s not worth repairing
- Fixed prices from your pictures
See our prices page and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
