Perth and Kinross · Scotland
Bath re-enamelling & resurfacing in Stanley, Perth and Kinross
We travel to Stanley for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- Enamel that’s lost its shine and feels rough
Bath re-enamelling at your home in Stanley
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. Typical jobs include a bath that stays dull however much you clean it and an original cast iron bath that needs restoring, in acrylic baths, basins & shower trays and cast iron baths.
Every repair is covered by our one-year guarantee.
- Where
- Stanley (PH1)
- County
- Perth and Kinross
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How the visit works
Here’s how a visit generally runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Plan for the best part of a day. Before leaving, we tell you when it can be used and how to look after it.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Point us to the nearest place to park
- Mention any parking restrictions or tricky access
Getting a price
Email us pictures of the damage and one of the whole item, with your PH1 postcode, and we will come back with a fixed quote.
Related advice
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Repairing versus replacing in Stanley
If the bath is sound, re-enamelling is typically much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Our bath re-enamelling starts from £350. We charge the same wherever you are, so there’s no premium for Stanley. The job itself decides the price: how much damage, what it’s made of and how many items.
Why us?
- Generally one visit, start to finish
- A fixed quote before booking
- Colour-matched on site
- Dust sheets down, tidy finish
See our full price list or bath cost comparison.
Places near Stanley
Also in Stanley
Do you need bath re-enamelling in Stanley?
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
Clients typically contact us about:
- An outdated colour you’d like to change
- An old resurfacing that’s failing
- An original cast iron bath that needs restoring
- Chips and rust in more than one place
What your quote should include
- What preparation is included
- How your room will be protected
- What happens if they find more damage
- Who turns up on the day
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Common questions in Stanley
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Can pets and children be at home?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
How much does bath re-enamelling cost in Stanley?
Resurfacing from £350. Every job gets a fixed price from your pictures. Send a close-up and a picture of the entire item with your PH1 postcode.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Just add the extra items to your photos and you will get one combined price.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
How we price bath re-enamelling
Resurfacing from £350. Each job gets its own fixed quote. These are the things that affect it:
- The size and number of damaged areas
- Any earlier repairs that need removing first
- How hard the colour is to match
- Whether we combine several jobs
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your photos
Good pictures mean an accurate price. Here’s what we find most useful:
- What it’s made of, if you know
- A picture taken from further back
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
If you are in Stanley and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Stanley and nearby
Stanley is about 6 miles north of Perth, in Perth and Kinross. Clients in Stanley get the same service as everywhere else we cover: a fixed price from your pictures, and a technician at your door on the day. Stanley is one of 107 places in Perth and Kinross we cover. We work right across the region, from Stanley to Edinburgh (about 38 miles away).
Jobs in PH1 work the same way as everywhere else we cover. Streets in the area include Station Road, Murray Place and Mill Street, all of which we cover. Nearby, we also work in West Tofts (1 mile north), Guildtown (2 miles east), Luncarty (2 miles south), Stormontfield (2 miles south) and Scone (5 miles south). Within a short drive, we also cover Perth (6 miles south), Blairgowrie and Rattray (9 miles north-east), Letham (6 miles south), Alyth (13 miles north-east), Coupar Angus (8 miles north-east) and Oakbank (6 miles south).
Landmarks near Stanley
We visit homes around 49 King Street pub, St Columba's Episcopal Church and Stobhall New Library and the streets around them. Nearby you will also find Perth Royal Infirmary (5.8 miles south) and Inchbervis Castle (0.8 miles east). For a walk, there’s Lily Loch.
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Have chips seen to early
- Fix dripping taps quickly
- Respect the curing time we give you
- Keep suction mats out of the bath
Wipe the bath dry after use where you can, and rinse off any bath products.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
Honest limits
We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Steel that has corroded right through
- Anything hidden under an old coating, until we remove it
- A bath split right through the body
Send us photos and we will tell you honestly.
Materials we repair
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
