West Sussex · England

Bath re-enamelling & resurfacing in Balls Cross, West Sussex

Full bath re-enamelling and resurfacing in Balls Cross, carried out at your home and guaranteed for a year.

  • Resurfacing from £350
  • A coloured bath you want in white
  • Wear marks under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Balls Cross homes

Bath re-enamelling in Balls Cross, done in place

When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. We are often asked to fix thin, worn enamel in places and a coating lifting around the plughole, across cast iron baths, acrylic baths and Victorian roll-tops.

The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.

Basin with yellowed glaze resurfaced to a clean white finish
Where
Balls Cross (GU28)
Region
West Sussex
Cover
12 months on all our work
Quote
From £350. Fixed and free, based on photos
Telephone
0345 017 0787
Page updated
23 October 2026

Landlords, agents and businesses in Balls Cross

For developers and builders, we fix damage before handover. We can visit several plots in one trip.

Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.

What we can’t put right

It helps to know what we cannot do too:

  • A metal bath with a through crack
  • Damage hidden under a previous coating, until it’s stripped back
  • Plumbing leaks, which need a plumber

Send us pictures and we’ll tell you honestly.

Materials we work on in Balls Cross

  • Victorian roll-tops
  • Basins & shower trays
  • Acrylic baths
  • Pressed steel baths
  • Cast iron baths

Repairs by material

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Pressed steel

Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.

Keeping it looking good

Simple care helps the repair last. Our advice:

  • Repair dripping taps early
  • Don’t let dyes or oils sit on the finish
  • Never use suction bath mats
  • Dry the bath after use to stop limescale

Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.

If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.

Signs you need bath re-enamelling in Balls Cross

Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.

Signs it’s time to call us include:

  • Brown or grey marks that don’t clean off
  • Lots of chips and rust spots
  • Worn patches where water runs and sits
  • A roll-top that is seen better days

Comparing quotes

  • How to look after the finish
  • Who will actually do the work
  • What prep work is covered
  • How your room will be protected

Choosing a repair company

What bath re-enamelling costs

Resurfacing from £350. We price every job individually, from your pictures. What matters most is:

  • How many items we do on one visit
  • The colour and finish to match
  • What the surface is made of
  • Any earlier repairs that need removing first

We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Quotes from your pictures

A couple of clear pictures is all it takes. It helps if you send:

  • A close-up of the damage, in focus
  • The postcode, so we can plan the visit
  • Something in shot to show the size
  • A wider photo showing the entire bath

Send us pictures of the damage and one of the entire item, and tell us you’re in Balls Cross, and we’ll reply with a fixed quote.

How it works

Here’s how a visit normally runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Allow most of the day from start to finish. Before we go, we will explain when it can be used and what to avoid for the first few days.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. The masking comes off, we tidy up and tell you when it can be used.

Preparing for the visit

  • Tell us about parking, stairs or access
  • Keep pets and children out of the room while we work
  • Point us to the nearest place to park

Ask for a price

The quickest way to a price is to send two or three photos through our quote form or ring us. We will say right away if a repair is the right fix.

Send pictures for a quote

Related advice

Balls Cross: your questions answered

How quickly can you book me in?

It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.

Do you work in Balls Cross?

Yes, we do. We send a technician to Balls Cross for every job, with no extra charge for travel.

What areas do you cover?

We cover the entire UK, including Balls Cross and the rest of West Sussex. Just include your postcode and we’ll confirm dates.

Does re-enamelling smell?

A little, during the work. Ventilation keeps it down, and it fades as the finish cures.

Will the new finish last?

That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.

What do you need from me?

Photos of the damage, a photo of the entire bath and your postcode. Then we’ll agree a date.

Are you accredited?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Can you quote from photos?

In nearly every case. If photos don’t show enough, we’ll ask for another angle.

Should I try a DIY kit first?

If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

Covering Balls Cross

Balls Cross is about 12 miles west of Horsham, in West Sussex. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 371 places across West Sussex, from the larger towns to small villages. Our jobs stretch from Balls Cross to London (39 miles away).

All of GU28 is within our area. We also cover the places around Balls Cross: Kirdford (2 miles east), Mackerel's Common (2 miles north-east), Plaistow (3 miles north-east), Ifold (4 miles north-east) and Wisborough Green (4 miles east). Further out, we also cover Horsham (12 miles east), Chichester (15 miles south-west), Littlehampton (15 miles south), Rustington (15 miles south), Storrington (10 miles south-east) and Billingshurst (6 miles east).

Near you in Balls Cross

We visit homes around Holy Trinity Church. Nearby you’ll also find Lodsworth Castle (4.7 miles south-west). The countryside around Balls Cross includes The Mens and Shillinglee Lake.

Map of Balls Cross © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.