Cumbria · England

Bath Re-enamelling in Bardsea

We travel to Bardsea for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.

  • Resurfacing from £350
  • A bath that stays dull however much you clean it
  • Wear marks under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Bardsea

FAQs for Bardsea

Can landlords book you?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.

Can you re-enamel a roll-top bath?

Yes. We can do the inside and outside if you’d like.

Does re-enamelling smell?

A little, during the work. Ventilation keeps it down, and it fades as the finish cures.

Can you repair several things at once?

Of course, and it typically saves money. Just add the extra items to your pictures and you’ll get one combined price.

What happens if you find more damage?

Your quote covers the damage in the photos. If there’s more, we will tell you before starting.

Is my repair covered?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

Do you need to take the bath out?

No. It’s re-enamelled where it stands, so the tiles and taps stay put.

What happens after I send photos?

You’ll get a fixed quote back, plus dates. You’re under no obligation.

Bath re-enamelling in Bardsea without replacing anything

We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. We’re frequently asked to fix chips and rust in more than one place and an original cast iron bath that needs restoring, on basins & shower trays, pressed steel baths and Victorian roll-tops.

All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.

Roll-top bath being refinished by a Surface Doctor technician
Area
Bardsea (LA12)
Area hub
Cumbria
Guarantee
12 months on all our work
Price
From £350. Fixed and free, based on pictures
Phone
0345 017 0787
Updated
23 October 2026

Honest limits

We’d rather lose a job than do one that won’t last, so here’s what a repair can’t put right:

  • Problems we can’t see until an old finish comes off
  • Leaks from fittings rather than the bath
  • Holes rusted through the metal

Send us pictures and we’ll tell you honestly.

What we work on

  • Acrylic baths
  • Cast iron baths
  • Basins & shower trays
  • Pressed steel baths
  • Victorian roll-tops

Landlords, agents and businesses in Bardsea

We are used to working with agents and managing companies. Send the address, photos and access details.

Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

When to call us in Bardsea

In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.

You may need us if you’ve spotted:

  • A coating lifting around the plughole
  • Worn patches where water runs and sits
  • A bath in a colour that no longer suits
  • Chips and rust in more than one place

What to look for in a quote

  • What the guarantee covers, and for how long
  • Whether cleaning and preparation are in the price
  • How the room is protected while they work
  • What happens if the damage is worse than the photos show

How to compare quotes

Our work in Bardsea

Bardsea is about 2 miles south of Ulverston, in Cumbria. Whether you’re in the middle of Bardsea or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Bardsea is one of 438 places in Cumbria we cover. You can also see our page for Liverpool, about 53 miles away.

Postcode districts we cover here: LA12. From Orchard Close, Orchard Road and Coast Road or a nearby road, we can come to you. Neighbouring places we cover include Baycliff (2 miles south-west), Dragley Beck (2 miles north), Great Urswick (2 miles west), Ulverston (2 miles north) and Swarthmoor (2 miles north-west). Further out, we also cover Barrow-in-Furness (7 miles south-west), Hindpool (7 miles south-west), Salthouse (7 miles south-west), Dalton-in-Furness (4 miles west), Risedale (6 miles south-west) and Vickerstown (8 miles south-west).

Local landmarks in Bardsea

We visit homes around Ulverston Victoria High School and Church of Holy Trinity and the streets around them. For rail, the closest station is Ulverston station, roughly 2.2 miles north-west. Other landmarks nearby include Furness General Hospital (5.8 miles west) and Laurel And Hardy Museum (2.4 miles north). Green spaces nearby include Urswick Tarn and Birkrigg Common.

Map of Bardsea © OpenStreetMap contributors

DIY repairs versus a professional job

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

Keeping it looking good

Most damage we see is avoidable. A few tips:

  • Keep toiletries on a shelf rather than in the bath
  • Leave the bath for the full curing time before using it
  • Wash away dyes and oils after use
  • Get any chip repaired quickly

Dry the bath after use if possible, and rinse off any bath products.

Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.

What we do, step by step

You don’t need to empty the room. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. It normally takes the best part of a day, and you can get on with other things while we are there.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures.

Preparing for the visit

  • Ensure the area is dry
  • Plan for the room to be out of bounds to pets and children
  • Mention any parking restrictions or tricky access

Getting a price

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.

Get a fixed quote

Read more

Different materials, different repairs

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.

How we price bath re-enamelling

Resurfacing from £350. There’s no area surcharge for Bardsea. The price reflects:

  • How hard the colour is to match
  • How much damage there is
  • The material and finish
  • How easy the damage is to reach

Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.

Getting a price from pictures

Good photos mean an accurate price. Here’s what helps:

  • Whether it’s been repaired or coated before
  • One sharp close-up of the damage
  • A photo taken from further back
  • Natural light rather than flash

We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.