Cumbria · England
Bath Re-enamelling in Dalton-in-Furness
Bath re-enamelling in Dalton-in-Furness without the cost of replacing. Send us pictures for a fixed quote, then book a visit.
- Resurfacing from £350
- Several chips and rust patches
- A coloured bath you want in white
DIY kit or professional repair?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Bath re-enamelling in Dalton-in-Furness, done in place
The bath stays where it is, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, and can be used again the following day. Our technicians work on Victorian roll-tops, cast iron baths and pressed steel baths, and the jobs we see most are several chips and rust patches and an old resurfacing that’s failing.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will come back.
- Where
- Dalton-in-Furness (LA15, LA13)
- Area hub
- Cumbria
- Cover
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What happens on the day
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a full day. We tidy up before we leave and tell you when it’s ready to use.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
Getting ready for the visit
- Point us to the nearest place to park
- Move bottles, mats and clutter away from the area
- Ensure the area is dry
Getting a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
Read more
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Problems we cannot see until an old finish comes off
- A metal bath with a through crack
- Leaking taps or wastes (a plumber’s job)
If in doubt, send photos and we will say what we think.
Materials we repair
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Pressed steel baths
Places near Dalton-in-Furness
What else we do in Dalton-in-Furness
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Do not use the bath until it has fully cured
- Don’t let dyes or oils sit on the finish
- Repair dripping taps early
- Have chips seen to early
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Repairing versus replacing in Dalton-in-Furness
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Prices start from £350. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why us?
- Accredited with CHAS, Constructionline and SafeContractor
- A year’s guarantee on all work
- Work done at your home or business
- Rooms protected and left tidy
See our pricing or guide to resurfacing and replacement costs.
Dalton-in-Furness and the surrounding area
Dalton-in-Furness is about 3 miles north-east of Barrow-in-Furness, in Cumbria. Jobs in Dalton-in-Furness are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. Dalton-in-Furness is one of 438 places in Cumbria we cover. We work right across the region, from Dalton-in-Furness to Liverpool (53 miles away).
Here we cover the LA15 and LA13 postcode area. Streets in the area include Market Street, Station Road and Market Place. Neighbouring places we cover include Newton (1 mile south), Stainton with Adgarley (1 mile south-east), Lindal in Furness (2 miles north-east), Marton (2 miles north) and Little Urswick (2 miles east). Larger places within reach include Barrow-in-Furness (3 miles south-west), Ulverston (4 miles north-east), Hindpool (3 miles south-west), Salthouse (3 miles south-west), Risedale (3 miles south) and Vickerstown (5 miles south-west).
What’s near Dalton-in-Furness
In Dalton-in-Furness, that means homes near Seventh Day Adventist Church With Attached Railings, Chappells Tavern and Chapel Street Infants and Nursery School and the streets around them. There’s a railway station in Dalton-in-Furness itself: Dalton station. Other landmarks nearby include Furness Abbey Museum (1.5 miles south-west) and Dalton Castle (less than half a mile west). For a walk, there’s Birkrigg Common and North Walney.
How we price bath re-enamelling
Resurfacing from £350. We give every job a fixed quote from pictures. These are the things that affect it:
- Whether old repairs or coatings need taking off
- How many items we do on one visit
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Send pictures for a quote
The better the pictures, the more accurate the price. Here’s what we find most useful:
- A close-up of the damage, in focus
- Something in shot to show the size
- A wider photo showing the entire bath
- What it’s made of, if you know
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in Cumbria and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
FAQs for Dalton-in-Furness
Can you re-enamel a roll-top bath?
Yes. Inside and out.
Will the bath be moved?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Can pets and children be at home?
Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Do you cover the entire of Cumbria?
We work UK-wide, so Dalton-in-Furness is covered. Prices don’t change with location.
Is my repair covered?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
About our accreditations · Every repair comes with a one-year guarantee.
