Lancashire · England
Bath Re-enamelling for Bare homes
Fixed-price bath re-enamelling in Bare and the surrounding area, generally in one visit and guaranteed for a year.
- Resurfacing from £350
- Several chips and rust patches
- Worn patches where water runs and sits
Bath re-enamelling in Bare, done in place
If your bath is sound but looks tired, re-enamelling is normally the most cost-effective option. There is no removal, plumbing or tiling involved. We regularly repair basins & shower trays, cast iron baths and Victorian roll-tops, and common reasons people get in touch are an old resurfacing that’s failing and an original cast iron bath that needs restoring.
We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone.
- Area
- Bare (LA4)
- County
- Lancashire
- Cover
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Do not let dyes or oils sit on the finish
- Stick to gentle, non-abrasive cleaners
- Fix dripping taps quickly
- Leave the bath for the full curing time before using it
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale cannot build up.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
What else we do in Bare
FAQs for Bare
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
How long will the bath be out of use?
One day for most baths, ready the day after. We give you timings with the quote.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
What if the damage is worse than the photos show?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Do you work in Bare?
We do. We send a technician to Bare for every job, with no extra charge for travel.
How much does bath re-enamelling cost in Bare?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
It’s been repaired before. Can you still fix it?
Yes, we frequently do. It can add a little time, which we include in the quote.
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Do you need bath re-enamelling in Bare?
Older baths often have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Send us a picture if you notice any of these:
- A peeling or bubbling previous coating
- Several chips and rust patches
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
What to look for in a quote
- A fixed quote, and whether VAT is included
- What protection goes down before work starts
- Whether the price covers travel
- What the guarantee covers, and for how long
Where we work around Bare
Bare is about 1 mile north-east of Morecambe, in Lancashire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Bare is one of 482 towns and villages in Lancashire we cover. Our nearest city page is Liverpool, about 46 miles away.
All of LA4 is covered. Jobs here include addresses on Low Lane, Bare Lane and Elms Road. Bare is on the A5105, so it’s easy for us to reach. Other places close to Bare include Torrisholme (1 mile south), Poulton-le-Sands (1 mile west), Morecambe (1 mile south-west), Slyne (1 mile north-east) and Hest Bank (1 mile north-east). We also work in nearby towns such as Fleetwood (13 miles south-west), Thornton (15 miles south-west), Heysham (3 miles south-west), Garstang (12 miles south), Carnforth (4 miles north-east) and Bolton-le-Sands (3 miles north-east).
Near you in Bare
Around Bare, we work in homes near Morecambe Bay Academy, St Christopher's Church and The Morecambe Public House and the streets around them. Bare has its own railway station: Bare Lane station. A little further out are Cottage Museum (2.3 miles south-east) and Lancaster Castle (2.2 miles south-east).
What happens on the day
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take the best part of a day. We clean up when we are done and tell you when it’s ready to use.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
How to prepare
- Clear the area around the damage
- Keep children and pets away from the room on the day
- Mention any earlier repairs or resurfacing
How to get a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Read more
What affects the price in Bare
Prices start from £350. We do not charge extra for travel to Bare. The price comes down to:
- Any earlier repairs that need removing first
- What kind of damage it is
- Unusual colours or finishes
- Whether we combine several jobs
A repair is priced on what needs doing, not where you live. The full price is agreed before you book, with no extras added later.
Quotes from your pictures
A couple of clear pictures is all it takes. It helps if you send:
- A picture taken from further back
- Any earlier repairs or coatings
- A close-up of the damage, in focus
- Daylight if possible, and no flash reflection
If you’re in Bare and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
When a repair is not the answer
Some jobs aren’t right for a repair, including:
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
- A bath split right through the body
If in doubt, send photos and we’ll say what we think.
What we work on
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
Should you replace it?
A refit takes several trades and several days. Re-enamelling takes one technician and generally one day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, with no extra for Bare. The job itself decides the price: how much damage, what it’s made of and how many items.
Why Bare clients choose us
- Colour-matched on site
- One price list for the entire UK
- Every repair guaranteed for a year
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our full price list and resurfacing vs replacement cost guide.
Landlord and trade work in Bare
Housing associations and facilities teams use us for planned and reactive repairs in Lancashire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Landlords, letting agents and housing providers in Bare use us as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
About our accreditations · Every repair comes with a one-year guarantee.
