Lancashire · England
Bath re-enamelling & resurfacing in Poulton-le-Sands, Lancashire
Fixed-price bath re-enamelling in Poulton-le-Sands and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A bath in a colour that no longer suits
Bath re-enamelling in Poulton-le-Sands without replacing anything
We don’t move the bath, so the taps, tiles and plumbing are not touched. It normally takes one visit, and can be used again the following day. We regularly repair basins & shower trays, pressed steel baths and cast iron baths, and the jobs we see most are staining under the taps and around the waste and a coating lifting around the plughole.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Location
- Poulton-le-Sands (LA4, LA3)
- Area hub
- Lancashire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Signs you need bath re-enamelling in Poulton-le-Sands
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Typical reasons for a call-out include:
- Brown or grey marks that do not clean off
- A coating lifting around the plughole
- A dull, rough surface that won’t come clean
- A period or roll-top bath worth keeping
Before you book anyone
- How your room will be protected
- What happens if the damage is worse than the pictures show
- Whether cleaning and preparation are in the price
- Aftercare advice
What we can’t put right
In fairness, there are a few things a repair won’t fix:
- A bath that is rusted through
- Problems we can’t see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
Poulton-le-Sands questions
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that is in the quote.
What happens after I send pictures?
You will get a fixed quote back, plus dates. You’re under no obligation.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
How long does re-enamelling last?
Look after it and it lasts. Gentle cleaning, no suction mats.
How do I get a price for bath re-enamelling in Poulton-le-Sands?
Prices start from £350. Because every job differs, we price from pictures. You will get a fixed figure before booking.
Can I get a quote without a visit?
Normally, yes. A close-up and a wider photo are enough to give a fixed price.
Is there any odour?
Expect a mild smell while we’re working, which fades afterwards.
Should you replace it?
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling renews the whole surface without moving it. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- Repair technicians who travel to you, UK-wide
- We’ll tell you if it’s not worth repairing
- Same prices wherever you are
Take a look at our full price list and bath cost comparison.
How it works
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job usually takes a full day. We tidy up before we leave and let you know when you can use it again.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s typically ready the next day.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Let the surface dry out before the visit
- Mention any earlier repairs or resurfacing
Getting a price
Upload a picture of the damage and a wider shot of the whole item, with your LA4 postcode, and we will reply with a fixed quote.
Related advice
Covering Poulton-le-Sands
Poulton-le-Sands is about 1 mile north of Morecambe, in Lancashire. Customers in Poulton-le-Sands get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. Poulton-le-Sands is one of 482 places in Lancashire where we work. We work right across the region, from Poulton-le-Sands to Liverpool (46 miles away).
Every address in LA4 and LA3 is within our area, from the main roads to the quietest streets. You will find streets such as Euston Road, Church Lane and Bridge Road. With the A589 close by, Poulton-le-Sands is simple for us to get to. We also cover the places around Poulton-le-Sands: Morecambe (1 mile south), Bare (1 mile east), Torrisholme (1 mile south-east), Sandylands (2 miles south-west) and Heysham (2 miles south-west). Larger places within reach include Lancaster (3 miles south-east), Fleetwood (13 miles south-west), Thornton (15 miles south-west), Cleveleys (15 miles south-west), Garstang (12 miles south) and Westfield War Memorial Village (3 miles south-east).
Local landmarks in Poulton-le-Sands
Locally, our jobs take us to homes close to Poulton-le-Sands Church of England Primary School, Holy Trinity Church and Morecambe High School. The nearest railway station is Morecambe station, roughly 0.5 miles south-west of the centre. Well-known places in the area include Lancaster Castle (2.7 miles south-east) and Queen Victoria Hospital (within half a mile south-west).
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Keeping it looking good
Simple care helps the repair last. We recommend:
- Don’t leave a chip unrepaired
- Rinse off hair dye, oils and bath bombs straight away
- Repair dripping taps early
- Leave the bath for the full curing time before using it
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Also near Poulton-le-Sands
More services for Poulton-le-Sands
Landlord and trade work in Poulton-le-Sands
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
About our accreditations · Every repair comes with a one-year guarantee.
