Nottinghamshire · England
Bath Re-enamelling in Barkestone-le-Vale
Full bath re-enamelling and resurfacing in Barkestone-le-Vale, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- Thin, worn enamel in places
What we cannot put right
A repair isn’t right for every job, including:
- A metal bath with a through crack
- A poorly supported acrylic bath, until it’s firmed up
- Leaks from fittings rather than the bath
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
Bath re-enamelling in Barkestone-le-Vale, done in place
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Common call-outs are for a bath that stays dull however much you clean it and brown or grey marks that don’t clean off, on acrylic baths, Victorian roll-tops and basins & shower trays.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Where
- Barkestone-le-Vale (NG13)
- County
- Nottinghamshire
- Cover
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Barkestone-le-Vale
What else we do in Barkestone-le-Vale
Common problems we fix in Barkestone-le-Vale
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
If you can see any of these, send us a photo:
- Wear marks under the taps
- Enamel that is lost its shine and feels rough
- A period or roll-top bath worth keeping
- Several chips and rust patches
What your quote should include
- Is the price fixed, and does it include VAT?
- Whether the price covers travel
- How the room is protected while they work
- What happens if the damage is worse than the pictures show
How the visit works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes a full day. If anything looks different from your photos, we’ll talk to you before going ahead.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Keep children and pets away from the room on the day
- Mention if the room is upstairs or in a flat
- Let us know about parking or access
Get a quote
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed price back. There is no charge for the quote and you are under no obligation.
Advice
Repair or replace: which is better?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Prices start from £350. We charge the same wherever you are, so there is no premium for Barkestone-le-Vale. What changes the price is the job itself: how much damage, what it’s made of and how many items.
What you get with us
- Same prices wherever you are
- A year’s guarantee on all work
- CHAS, Constructionline and SafeContractor accredited
- Technicians who travel to you, UK-wide
See our full price list or resurfacing vs replacement cost guide.
Different materials, different repairs
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Barkestone-le-Vale: your questions answered
What areas do you cover?
Across the UK. Our prices are the same everywhere.
Does re-enamelling smell?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
How long is the bath unusable?
Typically one day, with the bath ready the day after. Deeply pitted baths may need a second day.
How quickly can you book me in?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
Do you work in Barkestone-le-Vale?
Yes, we do. Repair technicians travel to Barkestone-le-Vale from across the region, with no extra charge for travel.
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we’ll do the rest.
Can I get a quote without a visit?
Generally, yes. Clear pictures let us give you a fixed quote without visiting.
Will there be a smell?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Covering Barkestone-le-Vale
Barkestone-le-Vale is about 8 miles west of Grantham, in Nottinghamshire. Our repair technicians come to clients in Barkestone-le-Vale and nearby villages, so nothing has to leave your home. Barkestone-le-Vale is one of 329 towns and villages in Nottinghamshire where we work. Our nearest city page is Birmingham, about 53 miles away.
Jobs in NG13 work the same way as everywhere else we cover. Local streets include Rutland Square, Middle Street and New Causeway, all of which we cover. If you are just outside Barkestone-le-Vale, we cover Redmile (1 mile east), Granby (2 miles north-west), Bottesford (3 miles north-east), Whatton-in-the-Vale (4 miles north-west) and Orston (4 miles north). Further out, we also cover Carlton (11 miles north-west), Newark-on-Trent (12 miles north), West Bridgford (12 miles west), Netherfield (11 miles west), Bingham (6 miles north-west) and Radcliffe on Trent (9 miles west).
Near you in Barkestone-le-Vale
We visit homes around The Chequers pub, Redmile Church of England Primary School and Church of St Peter and St Paul. The closest station to Barkestone-le-Vale is Elton & Orston station, roughly 3.2 miles north. A little further out are Belvoir Castle (2.5 miles east).
How to look after the repair
Much of the damage we repair could have been avoided. These habits help:
- Leave the bath for the full curing time before using it
- Dry the bath after use to stop limescale
- Do not leave bottles, razors or sponges standing on the surface
- Rinse off hair dye, oils and bath bombs immediately
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Housing associations and facilities teams use us for planned and reactive repairs in Nottinghamshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
About our accreditations · Every repair comes with a one-year guarantee.
