Nottinghamshire · England
Bath Re-enamelling for Redmile homes
Local bath re-enamelling for Redmile: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A dull, rough surface that will not come clean
Covering Redmile
Redmile is about 7 miles west of Grantham, in Nottinghamshire. Our technicians come to homes and businesses in Redmile and the surrounding area, so nothing has to leave your home. Redmile is one of 329 towns and villages in Nottinghamshire we cover. Our jobs stretch from Redmile to Birmingham (about 54 miles away).
Our repair technicians cover all of NG13. Local streets include Main Street, Post Office Lane and Baker's Lane, and we cover them all. Neighbouring places we cover include Barkestone-le-Vale (1 mile west), Bottesford (2 miles north), Granby (3 miles west), Orston (4 miles north-west) and Whatton-in-the-Vale (4 miles north-west). We also work in nearby towns such as Carlton (12 miles west), Newark-on-Trent (11 miles north), West Bridgford (13 miles west), Netherfield (12 miles west), Bingham (7 miles north-west) and Radcliffe on Trent (9 miles west).
Landmarks near Redmile
Around Redmile, we work in homes near Church of St Peter, Redmile Church of England Primary School and Belvoir High School, among other places. For rail, the closest station is Bottesford station, about 2.5 miles north. Nearby you will also find Belvoir Castle (1.7 miles south-east).
About our bath re-enamelling in Redmile
If your bath is sound but looks tired, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. Typical jobs include brown or grey marks that don’t clean off and several chips and rust patches, across basins & shower trays, Victorian roll-tops and acrylic baths.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll come back.
- Where
- Redmile (NG13)
- Area hub
- Nottinghamshire
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Redmile questions
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
Is it OK to have pets in the house?
Just keep them out of the work area. We will let you know when it’s safe to use again.
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Which areas do you work in?
Across the UK, so Redmile is covered. Prices do not change with location.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will do the rest.
Repair or replace: which is better?
A refit takes several trades and several days. Re-enamelling takes one technician and typically one day, with the bath ready the following day. Our bath re-enamelling starts from £350. We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Every repair guaranteed for a year
- A fixed quote before you book
- We come to you, anywhere in the UK
- Straight answers about what a repair can do
Read our pricing or bath cost comparison.
Do you need bath re-enamelling in Redmile?
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Look out for any of the following:
- An original cast iron bath that needs restoring
- A coating lifting around the plughole
- Enamel that’s lost its shine and feels rough
- A bath in a colour that no longer suits
Questions to ask before you book
- How long it needs to cure
- Whether the colour is mixed to match
- Who turns up on the day
- Whether there are any call-out or travel charges
What happens on the day
On the day itself, there’s little for you to do. Let us in and show us the room, and we will get on with it. Most visits take the best part of a day, tidy-up included.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s typically ready the next day.
How to prepare
- Tell us if there are stairs or a lift
- Ensure the area is dry
- Mention any parking restrictions or tricky access
Ask for a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and no obligation.
Read more
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
- Steel that has corroded right through
If in doubt, send pictures and we will say what we think before you book.
Materials we repair
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
How we price bath re-enamelling
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- What kind of damage it is
- Access to the area
- How many items we do on one visit
- Unusual colours or finishes
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
How to get a fixed price
Photographing the damage takes a minute. Try to send:
- Good light, ideally daylight, without flash glare
- Whether it’s been repaired or coated before
- One sharp close-up of the damage
- The postcode, so we can plan the visit
Send us a photo of the damage and a wider shot of the whole item, and tell us you’re in Redmile, and we’ll come back with a fixed quote.
Other services in Redmile
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Landlord and trade work in Redmile
If you manage property in Redmile, we’ll quote for several properties at once. Send pictures for each one and we will price them together.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
About our accreditations · Every repair comes with a one-year guarantee.
