Nottinghamshire · England
Bath re-enamelling & resurfacing in Granby, Nottinghamshire
Full bath re-enamelling and resurfacing for homes and businesses in Granby and across Nottinghamshire. Send pictures for a free, fixed quote.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Several chips and rust patches
Landlord and trade work in Granby
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Bath re-enamelling in Granby, done in place
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. We’re frequently asked to fix a peeling or bubbling previous coating and a dull, rough surface that won’t come clean, on acrylic baths, basins & shower trays and pressed steel baths.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we’ll come back.
- Location
- Granby (NG13)
- Area hub
- Nottinghamshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How the visit works
Visits start with a quick look at the job together, so there are no surprises. Next, we cover and mask everything nearby and the work begins. Allow most of the day, and we will tell you if anything changes.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can normally be used the day after.
How to prepare
- Let the surface dry out before the visit
- Have somewhere for us to park nearby if possible
- Tell us about any previous repairs or coatings
Getting a price
Email us pictures of the damage and a wider shot of the whole item, with your NG13 postcode, and we will come back with a fixed quote.
Read more
Covering Granby
Granby is about 9 miles south-east of Carlton, in Nottinghamshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in all 329 towns and villages in Nottinghamshire. You can also see our page for Birmingham, about 52 miles away.
Jobs in NG13 are booked in the same way as anywhere else. Streets in the area include Main Street, Old Forge Lane and Green Lane, and we cover them all. We also travel to Whatton-in-the-Vale (2 miles north), Barkestone-le-Vale (2 miles south-east), Aslockton (2 miles north), Redmile (3 miles east) and Orston (3 miles north-east). Larger places within reach include Beeston (14 miles west), Carlton (9 miles north-west), Newark-on-Trent (11 miles north), West Bridgford (10 miles west), Netherfield (9 miles west) and Bingham (4 miles north-west).
Around Granby
Around Granby, we work in homes near St Mary's Church. Granby’s nearest station is Aslockton station, roughly 2.3 miles north of the centre. Other landmarks nearby include Radcliffe Asylum (5.2 miles west) and Belvoir Castle (4.6 miles east).
Repairing versus replacing in Granby
Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Prices start from £350. The price reflects the work involved, not where you live. You will see the full price before you book, with nothing added on the day.
Why us?
- We leave the room as we found it
- Accredited with CHAS, Constructionline and SafeContractor
- One-year guarantee on every repair
- A fixed quote before you book
Take a look at our pricing and guide to resurfacing and replacement costs.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Signs you need bath re-enamelling in Granby
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
You may need us if you’ve spotted:
- Worn patches where water runs and sits
- Chips and rust in more than one place
- An old resurfacing that’s failing
- Stains that won’t shift
Before booking anyone
- What prep work is covered
- Who will actually do the work
- How changes to the job are handled
- How long it needs to cure
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Repair dripping taps early
- Dry the bath after use to stop limescale
- Rinse off hair dye, oils and bath bombs right away
- Store bottles off the bath
A quick rinse and wipe after use helps, especially in hard water areas, so limescale can’t build up.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
When we would advise against a repair
Before you book, it’s worth knowing the limits too:
- A metal bath with a through crack
- Acrylic that moves when you stand in it
- Anything hidden under an old coating, until we remove it
Send us pictures and we’ll tell you honestly.
Materials we repair
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
What bath re-enamelling costs
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
- Access to the area
- The type of damage
Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Getting a price from photos
Before you send photos, a few simple things make all the difference:
- A clear, close picture of the problem area
- One picture of the entire bath
- Any details about the material
- Your postcode, so we can check dates
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Questions from Granby
Can you repair several things at once?
Of course, and it typically saves money. Just add the extra items to your photos and you will get one combined price.
How long does re-enamelling take?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
How quickly can you book me in?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
How do I book?
Send pictures through the quote form or call 0345 017 0787, and we’ll do the rest.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Which areas do you work in?
We cover the entire UK, including Granby and the rest of Nottinghamshire. Just include your postcode and we will confirm dates.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted before the end of a tenancy.
What else we do in Granby
About our accreditations · Every repair comes with a one-year guarantee.
