Greater Manchester · England
Bath Re-enamelling in Barlow Moor
Bath re-enamelling in Barlow Moor without the cost of replacing. Send us photos for a fixed quote, then book a visit.
- Resurfacing from £350
- Lots of chips and rust spots
- A coloured bath you want in white
Repairs by material
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
How we handle bath re-enamelling in Barlow Moor
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. We’re often asked to fix an outdated colour you’d like to change and stains that won’t shift, in acrylic baths, basins & shower trays and Victorian roll-tops.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Location
- Barlow Moor (M21, M20, M16)
- County
- Greater Manchester
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
The process
The work is clean and fairly quiet, so you can stay at home while we’re there. We protect the area first, then the job itself takes the best part of a day. Before we leave, we explain how soon it can be used and how to look after it.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Have a window or extractor fan available
- Let us know which floor the room is on
- Tell us about parking, stairs or access
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote the same day in most cases.
Advice
Can I fix it myself?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
About Barlow Moor
Barlow Moor is about 2 miles west of Burnage, in Greater Manchester. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our repair technicians cover 72 places across Greater Manchester.
We work across M21, M20 and M16 and the streets around it. Streets in the area include Nell Lane, Haddon Road and Floyd Avenue. Main roads around Barlow Moor include the A5145, so getting to you is simple. We also cover the places around Barlow Moor: Old Moat (1 mile north-east), Chorlton-cum-Hardy (1 mile north-west), Didsbury (1 mile south-east), Whalley Range (1 mile north) and Northern Moor (1 mile south). Within a short drive, we also cover Manchester (4 miles north-east), Wythenshawe (3 miles south), Northern Quarter (4 miles north), Chinatown (3 miles north), Ancoats (4 miles north) and Broughton (5 miles north).
Around Barlow Moor
Our customers here include homes close to Old House at Home, Barlow Hall Primary School and Loreto High School and the streets around them. Also close by are Chorlton Park (0.5 miles north-west) and Christ Church (0.5 miles south). Barlow Moor’s nearest station is Burnage station, about 1.9 miles east. A little further out are Manchester Precinct Centre (2.8 miles north) and Alexandra Park (1.4 miles north). For a walk, there’s Unicorn Grocery.
Work for landlords and builders
For anyone letting property in or around Barlow Moor, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.
We work for landlords, letting agents and housing providers in Barlow Moor as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Barlow Moor questions
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How do I get a price for bath re-enamelling in Barlow Moor?
Resurfacing from £350. We give a fixed quote from your pictures. Send a close-up and a picture of the entire item and your postcode.
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
What information do you need?
Send pictures through the quote form or call 0345 017 0787, and we will do the rest.
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Towns and villages near Barlow Moor
More services for Barlow Moor
How we price bath re-enamelling
Resurfacing from £350. We don’t charge extra for travel to Barlow Moor. The price comes down to:
- What kind of damage it is
- Whether we combine several jobs
- Any earlier repairs that need removing first
- What the surface is made of
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
How to get a fixed price
A couple of clear pictures is all it takes. It helps if you send:
- Details of any past repairs
- A coin or ruler next to the damage for scale
- Where you are, by postcode
- The material, if you know it
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You will get a fixed quote, not an estimate.
When to call us in Barlow Moor
Older baths frequently have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
If you can see any of these, send us a picture:
- Wear marks under the taps
- Enamel that’s lost its shine and feels rough
- An old resurfacing that is failing
- An original cast iron bath that needs restoring
Comparing quotes
- What happens if the damage is worse than the photos show
- How long the guarantee is and what it covers
- Whether there are any call-out or travel charges
- How the colour is matched
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- Stick to gentle, non-abrasive cleaners
- Dry the bath after use to stop limescale
- Store bottles off the bath
- Don’t leave a chip unrepaired
A quick rinse and wipe after use helps, especially in hard water areas, so limescale can’t build up.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Repairing versus replacing in Barlow Moor
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Resurfacing from £350, with every job priced individually. Compared with replacing, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
What you get with us
- Straight answers about what a repair can do
- A fixed quote before you book
- We leave the room as we found it
- We come to you, anywhere in the UK
Read our full price list and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
