North Yorkshire · England
Bath Re-enamelling in Beadlam
Bath re-enamelling in Beadlam without the cost of replacing. Get a fixed price from your pictures, then book a visit.
- Resurfacing from £350
- Chips and rust in more than one place
- Enamel that’s lost its shine and feels rough
Bath re-enamelling at your home in Beadlam
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We work on basins & shower trays, acrylic baths and Victorian roll-tops, and common reasons people contact us are worn patches where water runs and sits and brown or grey marks that don’t clean off.
A one-year guarantee comes as standard.
- Area
- Beadlam (YO62)
- Area hub
- North Yorkshire
- Cover
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Repairs by material
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
When to call us in Beadlam
Enamel does not fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
Clients usually contact us about:
- A coloured bath you want in white
- Wear marks under the taps
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
What to look for in a quote
- Whether they match the colour on site
- What the guarantee covers, and for how long
- Is the price fixed, and does it include VAT?
- When it can be used again
Other services in Beadlam
What we do, step by step
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes the best part of a day. If anything looks different from your photos, we will talk to you before going ahead.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Let us know about parking or access
- Keep children and pets away from the room on the day
- Tell us about any previous repairs or coatings
How to get a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
Related advice
Covering Beadlam
Beadlam is about 18 miles east of Northallerton, in North Yorkshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. We work in all 626 towns and villages in North Yorkshire, from the larger towns to small villages. Our jobs stretch from Beadlam to Leeds (about 38 miles away).
We work across the YO62 postcode area and the streets around it. Local streets include The Croft, High Lane and Gale Lane, and we cover them all. Nearby, we also work in Nawton (1 mile east), Wombleton (1 mile east), Pockley (1 mile north-west), Harome (2 miles south) and Welburn (2 miles east). We also work in nearby towns such as Malton (11 miles south-east), Pickering (9 miles east), Thirsk (14 miles west), Easingwold (12 miles south-west), Norton-on-Derwent (12 miles south-east) and Sowerby (14 miles west).
Local landmarks in Beadlam
Around Beadlam, we work in homes near Rose And Crown Inn, Ryedale School and Church of St Hilda, among other places. Well-known places in the area include Helmsley Castle (2.6 miles west) and Kirkdale (1 mile north-east).
Common questions in Beadlam
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
How long will the bath be out of use?
One day for most baths and can be used the day after. We will confirm timings when we quote.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Can you re-enamel a roll-top bath?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Can landlords book you?
Yes, frequently. We can quote for several properties together and work between tenancies.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
How much does bath re-enamelling cost in Beadlam?
Prices start from £350. We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
What affects the price in Beadlam
Prices start from £350. You will not pay by the hour. The price is based on:
- Doing more than one item at once
- How hard the colour is to match
- The size and number of damaged areas
- The material and finish
There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Send photos for a quote
When you take your pictures, these tips help us give you a firm price:
- A close-up of the damage, in focus
- Where you are, by postcode
- A wider photo showing the whole bath
- A coin beside the damage so we can judge size
To get a price, send two or three photos through our quote form or call us. We’ll say right away whether it can be repaired.
What we cannot put right
Some problems need a builder, plumber or fitter rather than us:
- A poorly supported acrylic bath, until it’s firmed up
- Problems we can’t see until an old finish comes off
- A bath that is rusted through
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
For landlords and businesses
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We regularly work with letting and managing agents. Send the address, pictures and access details.
Repair or replace in Beadlam?
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- Colour mixed on the day to match
- We leave the room as we found it
- A year’s guarantee on all work
See our prices page or resurfacing vs replacement cost guide.
DIY repairs versus a professional job
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
About our accreditations · Every repair comes with a one-year guarantee.
