North Yorkshire · England

Bath re-enamelling & resurfacing in Pockley, North Yorkshire

Bath re-enamelling across Pockley and nearby, generally in one visit.

  • Resurfacing from £350
  • Worn patches where water runs and sits
  • An original cast iron bath that needs restoring
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Pockley?

Pockley: your questions answered

Can pets and children be at home?

Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.

Do you charge for travel?

There is no separate call-out charge. Your fixed quote includes everything.

Can you resurface a pink bath in white?

Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.

Someone resurfaced my bath and it’s peeling. Can you help?

In most cases. We strip the failing coating and resurface it properly. Mention it when you send pictures.

What if the damage is worse than the pictures show?

We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.

Which areas do you work in?

The whole UK, including all of North Yorkshire. Send your postcode with your photos and we’ll offer you dates.

Is it messy?

We protect the room with dust sheets and masking first, and we clean up when we have finished.

Is there any odour?

Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.

About our bath re-enamelling in Pockley

A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. Whether it’s brown or grey marks that don’t clean off and a bath in a colour that no longer suits, we can help.

Big or small, you get the same one-year guarantee.

Location
Pockley (YO62)
Region
North Yorkshire
Guarantee
A year, on every repair
Quotes
From £350. Free and fixed, from your pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Why repair rather than replace?

Replacing a bath can take several days across several trades. Re-enamelling is one technician, usually one day, and the bath is usable the day after. Prices start from £350. Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Why choose Surface Doctor in Pockley

  • One visit for most repairs
  • Colours mixed by hand to suit your surface
  • A year’s guarantee on all work
  • CHAS and Constructionline accredited

Take a look at our pricing and guide to resurfacing and replacement costs.

For landlords and businesses

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

For anyone letting property in or around Pockley, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.

When to call us in Pockley

By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.

Typical reasons for a call-out include:

  • Brown or grey marks that do not clean off
  • A bath in a colour that no longer suits
  • An old resurfacing that’s failing
  • A bath that stays dull however much you clean it

Questions to ask before you book

  • How the colour is matched
  • What preparation is included
  • Who will actually do the work
  • What aftercare is recommended

How to compare quotes

What your bath is made of matters

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

What a repair can’t fix

Some jobs are not right for a repair, for example:

  • Steel that has corroded right through
  • Plumbing leaks, which need a plumber
  • A metal bath with a through crack

Not sure? Send photos and we will give you a straight answer before you book.

Materials we work on in Pockley

  • Cast iron baths
  • Victorian roll-tops
  • Acrylic baths
  • Pressed steel baths
  • Basins & shower trays

What we do, step by step

We turn up when we said we would, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. Most visits take a full day, and the room is left clean and tidy.

  1. The bathroom is protected and ventilation set up.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure.

Preparing for the visit

  • Clear the area around the damage
  • Make sure the area is dry
  • Let us know which floor the room is on

Getting a price

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.

Get a free quote

Read more

How we price bath re-enamelling

Resurfacing from £350. We price every job individually, from your pictures. The main factors are:

  • Previous DIY repairs that have to come out
  • Where the damage is and how we get to it
  • The material
  • The colour and finish to match

Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Send photos for a quote

You can generally get a fixed quote without us visiting. To make it quick:

  • Any details about the material
  • Something in shot to show the size
  • One picture of the entire bath
  • Details of any past repairs

We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.

About Pockley

Pockley is about 13 miles north-west of Malton, in North Yorkshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Our technicians cover 626 places in North Yorkshire, from the larger towns to small villages. We work right across the region, from Pockley to Leeds (38 miles away).

We work across YO62 and the streets around it. Neighbouring places we cover include Beadlam (1 mile south-east), Nawton (1 mile south-east), Helmsley (2 miles south-west), Wombleton (2 miles south-east) and Harome (2 miles south). Within a short drive, we also cover Malton (13 miles south-east), Pickering (10 miles east), Thirsk (13 miles west), Easingwold (12 miles south-west), Norton-on-Derwent (14 miles south-east) and Sowerby (14 miles west).

What’s near Pockley

We visit homes around Ryedale School and Church of St John the Baptist and the streets around them. Other landmarks nearby include Helmsley Castle (2.2 miles south-west) and Kirkdale (1.7 miles east).

Map of Pockley © OpenStreetMap contributors

Can I fix it myself?

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.