Gloucestershire · England
Bath Re-enamelling for Beckford homes
Full bath re-enamelling and resurfacing for homes and businesses in Beckford and across Gloucestershire. Free, fixed quotes from your photos.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- An original cast iron bath that needs restoring
Bath re-enamelling in Beckford, done in place
Re-enamelling is a one-day job for most baths. Nothing is disconnected or removed. We’re frequently asked to fix lots of chips and rust spots and an original cast iron bath that needs restoring, in cast iron baths, pressed steel baths and acrylic baths.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Area
- Beckford (GL20)
- County
- Gloucestershire
- Cover
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Repair or replace in Beckford?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- CHAS, Constructionline and SafeContractor accredited
- Normally one visit, start to finish
- No extra charge for your area
- Everything repaired in place
See our full price list or bath cost comparison.
How we price bath re-enamelling
Prices start from £350. We charge the same across the UK, including Beckford. What changes the price is:
- Where the damage is and how we get to it
- What kind of damage it is
- The material
- How many items we do on one visit
Compared with replacing, a repair is usually a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
How to get a fixed price
Phone pictures are fine, there is no need for anything special. Ensure they show:
- Good light, ideally daylight, without flash glare
- Details of any past repairs
- A wider photo showing the whole bath
- A clear, close picture of the problem area
Send us a picture of the damage and a wider shot of the entire item, with your GL20 postcode, and we’ll come back with a fixed quote.
When to call us in Beckford
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
Clients normally contact us about:
- A period or roll-top bath worth keeping
- A coating lifting around the plughole
- An outdated colour you’d like to change
- Wear marks under the taps
Comparing quotes
- What protection goes down before work starts
- How to look after the finish
- Whether a trained technician does the job
- When it can be used again
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in Gloucestershire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
We’re used to working with agents and managing companies. Send the address, photos and access details.
Your questions about bath re-enamelling in Beckford
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
How soon can you come?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
How do I get a price for bath re-enamelling in Beckford?
Resurfacing from £350. We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo with your GL20 postcode.
Can you quote from pictures?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
How long will the bath be out of use?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
When we’d advise against a repair
It helps to know what we can’t do too:
- A bath that is rusted through
- Leaking taps or wastes (a plumber’s job)
- Anything hidden under an old coating, until we remove it
If in doubt, send pictures and we will say what we think.
Materials we work on in Beckford
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
How it works
We work cleanly and quietly, so you can stay at home while we are there. We protect the area first, then the job itself takes most of the day. Before we leave, we explain how soon it can be used and how to care for it.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Let us know if it has been repaired before
- Avoid using the area for a few hours before we arrive
- Tell us if there are stairs or a lift
How to get a price
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Advice
About Beckford
Beckford is about 5 miles north of Bishop's Cleeve, in Gloucestershire. Jobs in Beckford are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. We cover all 470 towns and villages across Gloucestershire. You can also see our page for Birmingham, about 32 miles away.
We cover every part of the GL20 postcode area and the streets around it. Local streets include Main Street and Back Lane. Neighbouring places we cover include Beckford Cross (1 mile south-east), Little Beckford (1 mile south), Conderton (1 mile north-west), Overbury (2 miles north-west) and Ashton under Hill (2 miles north-east). Further out, we also cover Cheltenham (9 miles south), Gloucester (14 miles south-west), Tewkesbury (5 miles south-west), St Paul's (8 miles south), Lansdown (9 miles south) and Bishop's Cleeve (5 miles south).
Local landmarks in Beckford
Locally, our jobs take us to homes close to Church of St John the Baptist and Bredon Hill Middle School and the streets around them. Beckford’s nearest station is Ashchurch for Tewkesbury station, roughly 3.4 miles south-west of the centre. A little further out are Elmley Castle (2.8 miles north). Not far away are Bredon Hill and Kemerton Lake.
Also near Beckford
Other services in Beckford
About our accreditations · Every repair comes with a one-year guarantee.
