Gloucestershire · England
Bath re-enamelling & resurfacing in Conderton, Gloucestershire
We travel to Conderton for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Staining under the taps and around the waste
- A roll-top that is seen better days
Bath re-enamelling at your home in Conderton
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. We regularly repair basins & shower trays, pressed steel baths and acrylic baths, and people most frequently call us about a period or roll-top bath worth keeping and stains that won’t shift.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we’ll come back.
- Where
- Conderton (GL20)
- Area hub
- Gloucestershire
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Conderton and nearby
Conderton is about 5 miles north-east of Tewkesbury, in Gloucestershire. We visit clients in Conderton and nearby villages, so there is no workshop to go to. We work in 470 places across Gloucestershire, from the larger towns to small villages. You can also see our page for Birmingham, about 31 miles away.
We work across GL20 and the streets around it. We also travel to Overbury (1 mile north), Kemerton (1 mile west), Beckford (1 mile south-east), Beckford Cross (1 mile south-east) and Little Beckford (2 miles south-east). Larger places within reach include Cheltenham (9 miles south), Gloucester (15 miles south-west), Tewkesbury (5 miles south-west), St Paul's (9 miles south), Lansdown (10 miles south) and Bishop's Cleeve (6 miles south).
What’s near Conderton
We visit homes around Overbury CofE First School, Yew Tree Public House and Bredon Hill Middle School, among other places. The closest station to Conderton is Ashchurch for Tewkesbury station, roughly 3.3 miles south-west of the centre. Other landmarks nearby include Elmley Castle (2.1 miles north-east). The countryside around Conderton includes Beckford Nature Reserve and Bredon Hill.
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Fix dripping taps quickly
- Wash away dyes and oils after use
- Keep suction mats out of the bath
- Do not use the bath until it has fully cured
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
When to call us in Conderton
Frequently the bath has just had decades of use, and only the surface is worn. The body of the bath is typically perfectly sound.
People normally call us when they notice something like this:
- Stains that will not shift
- A period or roll-top bath worth keeping
- A dull, rough surface that won’t come clean
- A bath in a colour that no longer suits
What to look for in a quote
- Aftercare advice
- Who turns up on the day
- How long the guarantee is and what it covers
- Whether the price covers travel
Also near Conderton
What else we do in Conderton
Landlord and trade work in Conderton
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
How it works
We agree an arrival time beforehand. On site, it takes most of the day for most jobs. We leave the room clean.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Tell us about parking, stairs or access
- Clear the area around the damage
- Tell us if there are stairs or a lift
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
Advice
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it fails, we can still put it right.
Questions from Conderton
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Send pictures of everything together and we’ll quote them together.
How long will the bath be out of use?
Typically one day, with the bath ready the day after. Deeply pitted baths may need a second day.
Can you redo someone else’s repair?
Yes, we frequently do. Removing the old work can add time, and that is in the quote.
Is there any odour?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children.
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Our bath re-enamelling starts from £350. We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- A fixed quote before you book
- We leave the room as we found it
- Straight answers about what a repair can do
- Same prices wherever you are
See our pricing and guide to resurfacing and replacement costs.
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
What we cannot put right
Not everything can be repaired, and we’d rather say so up front. Repairs won’t solve:
- Leaks from fittings rather than the bath
- A metal bath with a through crack
- An acrylic bath that flexes badly underfoot
If in doubt, send photos and we’ll say what we think before you book.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
