North Yorkshire · England
Bath Re-enamelling for Beckwithshaw homes
Fixed-price bath re-enamelling in Beckwithshaw and the surrounding area, usually in one visit and guaranteed for a year.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A roll-top that is seen better days
Bath re-enamelling in Beckwithshaw without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Common call-outs are for a dull, rough surface that won’t come clean and stains that won’t shift, across pressed steel baths, basins & shower trays and Victorian roll-tops.
Every repair comes with a one-year guarantee.
- Location
- Beckwithshaw (HG3)
- County
- North Yorkshire
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Places near Beckwithshaw
More services for Beckwithshaw
About Beckwithshaw
Beckwithshaw is about 3 miles south-west of Harrogate, in North Yorkshire. We agree a date that works for you, and you will know when to expect us, so there’s no waiting around. We cover all 626 towns and villages in North Yorkshire, from the larger towns to small villages. You can also see our page for Leeds, about 11 miles away.
We cover every part of the HG3 postcode area and the streets around it. Whether you live on Otley Road, Moor Park Close and Shaw Lane or anywhere nearby, we can come to you. Neighbouring places we cover include Beckwith (1 mile south-east), Harlow Hill (1 mile east), Brackenthwaite (1 mile south-east), Burn Bridge (2 miles south-east) and North Rigton (3 miles south). Within a short drive, we also cover Harrogate (3 miles north-east), Knaresborough (6 miles north-east), Ripon (11 miles north), Tadcaster (15 miles south-east), Starbeck (4 miles north-east) and Bilton (3 miles north-east).
Landmarks near Beckwithshaw
Typical jobs here are in homes near Church of St Michael and All Angels, Rossett School and RHS Garden Harlow Carr, among other places. You’ll also find Beckwithshaw Community Primary School (less than half a mile north) and Smiths Arms (within half a mile north). The nearest railway station is Pannal station, about 2.7 miles east of the centre. Nearby you will also find Harrogate District Hospital (3.4 miles north-east) and Victoria Shopping Centre (2.6 miles north-east). Open spaces near Beckwithshaw include Great Alms Cliff.
What bath re-enamelling costs
Resurfacing from £350. We price every job individually, from your photos. What matters most is:
- How many items we do on one visit
- The type of damage
- How hard the colour is to match
- How many areas need work
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
How to get a fixed price
A couple of clear pictures is all it takes. Try to include:
- What it’s made of, if you know
- Natural light rather than flash
- A coin beside the damage so we can judge size
- A close-up of the damage, in focus
Send us photos of the damage and a wider shot of the whole item, with your HG3 postcode, and we will reply with a fixed quote.
Why repair rather than replace?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. A repair typically costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
What you get with us
- Repair technicians who travel to you, UK-wide
- Rooms protected and left tidy
- Same prices wherever you are
- Colour-matched on site
Read our full price list or guide to resurfacing and replacement costs.
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- Acrylic that moves when you stand in it
- Leaks from fittings rather than the bath
- A bath that’s rusted through
Send us photos and we’ll tell you honestly.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
What happens on the day
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job normally takes a full day. We tidy up before we leave and tell you when it’s ready to use.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Keep a parking space free if you can
- Move bottles, mats and clutter away from the area
Get a quote
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Read more
Beckwithshaw: your questions answered
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders across North Yorkshire.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send photos.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
Do you come to Beckwithshaw?
Yes. We work across the UK and come to Beckwithshaw. Send us photos for a fixed quote, or call 0345 017 0787.
Do the materials smell?
There can be some smell while we work, which is why we ventilate. It fades as everything cures.
Is there a guarantee?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Do you need to take the bath out?
No. We resurface it in place, so the tiles and taps stay put.
For landlords and businesses
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Common problems we fix in Beckwithshaw
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
The things clients normally mention when they call include:
- Several chips and rust patches
- An original cast iron bath that needs restoring
- Staining under the taps and around the waste
- Thin, worn enamel in places
Before you book anyone
- Who turns up on the day
- A fixed quote, and whether VAT is included
- How your room will be protected
- Whether cleaning and preparation are in the price
About our accreditations · Every repair comes with a one-year guarantee.
