Nottingham · England
Bath re-enamelling & resurfacing in Beechdale, Nottingham
Bath re-enamelling across Beechdale and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A coloured bath you want in white
Repairing versus replacing in Beechdale
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. The price reflects the work involved, not where you live. You’ll see the full price before you book.
Why Beechdale customers choose us
- Fixed prices from your pictures
- One visit for most repairs
- Colour mixed on the day to match
- We come to you, anywhere in the UK
Read our prices page and resurfacing vs replacement cost guide.
Bath re-enamelling in Beechdale, done in place
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. We work on basins & shower trays, Victorian roll-tops and acrylic baths, and common reasons people contact us are thin, worn enamel in places and a roll-top that’s seen better days.
You get a one-year guarantee, the same in Beechdale as everywhere else we work.
- Location
- Beechdale (NG8, NG7)
- Region
- Nottingham
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Common problems we fix in Beechdale
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
You may need us if you’ve spotted:
- Thin, worn enamel in places
- A dull, rough surface that won’t come clean
- A bath in a colour that no longer suits
- Several chips and rust patches
What to look for in a quote
- What prep work is covered
- How to look after the finish
- How your room will be protected
- Who will actually do the work
Covering Beechdale
Beechdale is about 1 mile west of Nottingham, in Nottingham. We agree a date that works for you, and we will give you an arrival time in advance, so you’re not left waiting in all day. We cover all 51 towns and villages across Nottingham. You can also see our page for Birmingham, about 45 miles away.
Our visits in NG8 and NG7 work the same way as everywhere else we cover. Whether you live on Sydney Road, Sawmill Lane and Brendon Road or a nearby road, a technician can come to you. Main roads around Beechdale include the A609, which makes travel easy. If you are just outside Beechdale, we cover Aspley (1 mile north), Cinderhill (2 miles north), Wollaton (2 miles south-west), Lenton Abbey (2 miles south) and Strelley (2 miles west). Larger places within reach include Arnold (4 miles north-east), Bulwell (3 miles north), Sneinton (3 miles east), St Ann's (3 miles east), Clifton (4 miles south) and Sherwood (3 miles north-east).
Landmarks near Beechdale
In Beechdale, that means homes near St Margaret's Church, Melbourne Park and Robert Shaw Primary and Nursery School. Other local landmarks include William Crane Comprehensive School (1 mile north), Nottingham Girls' Academy (under half a mile north) and The Wollaton pub (0.5 miles south-west). Beechdale’s nearest station is Nottingham station, about 2.5 miles south-east of the centre. Well-known places in the area include Queen's Medical Centre (1.4 miles south-east) and North Wilford (2.3 miles south-east). Green spaces nearby include Wilford Hill and Colwick Woods.
Also near Beechdale
Also in Beechdale
Common questions in Beechdale
Will the price change on the day?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Can you re-enamel a roll-top bath?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Can I add another job to the visit?
Of course, and it usually saves money. Send pictures of everything together and we’ll quote them together.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
What happens once I’ve sent pictures?
We come back with a fixed price, plus dates. There is no obligation to book.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Problems we cannot see until an old finish comes off
- A bath that’s rusted through
- A cast iron or steel bath that is cracked right through
If in doubt, send photos and we will say what we think.
Materials we repair
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
Landlord and trade work in Beechdale
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Landlords, letting agents and housing providers in Beechdale use us as well as householders. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
Aftercare tips
To keep it looking its best:
- Keep suction mats out of the bath
- Don’t use the bath until it has fully cured
- A dripping tap should be fixed promptly
- Store bottles off the bath
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
What happens on the day
Your technician turns up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes most of the day, and the room is left clean and tidy.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
Before we arrive
- Tell us about any previous repairs or coatings
- Tell us about parking, stairs or access
- Make sure the room can be ventilated
Ask for a price
The quickest way to a price is to send a couple of photos through our quote form or ring us. We will tell you honestly whether it can be repaired.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
