Oxfordshire · England
Bath Re-enamelling for Begbroke homes
Bath re-enamelling for Begbroke, without a refit. Send us pictures for a fixed quote, then book a visit.
- Resurfacing from £350
- Stains that won’t shift
- Several chips and rust patches
How we price bath re-enamelling
Prices start from £350. Each job gets its own fixed quote. These are the things that affect it:
- How easy the damage is to reach
- The type of damage
- The colour and finish to match
- Previous DIY repairs that have to come out
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Send pictures for a quote
It only takes a minute to photograph the damage. Please include:
- What it’s made of, if you know
- Natural light rather than flash
- A close-up of the damage, in focus
- Your postcode, so we can check dates
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. You will get a fixed price, not an estimate.
Bath re-enamelling in Begbroke without replacing anything
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. If you are dealing with stains that won’t shift and a bath that stays dull however much you clean it, we can help.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Area
- Begbroke (OX5)
- Area hub
- Oxfordshire
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Honest limits
It helps to know what we can’t do too:
- An acrylic bath that flexes badly underfoot
- A metal bath with a through crack
- Leaks from fittings rather than the bath
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
The process
Once we’re through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes most of the day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Move bottles, mats and clutter away from the area
- Ensure the area is dry
- Let us know if it has been repaired before
Ask for a price
To get a price, send two or three pictures using our quote form or ring us. We will tell you honestly whether it can be repaired.
Advice
Other services in Begbroke
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Your questions about bath re-enamelling in Begbroke
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
Can pets and children be at home?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
How quickly can you book me in?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
How long does re-enamelling take?
Usually a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
DIY kit or professional repair?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Aftercare tips
Once the work has cured, treat it gently:
- A quick wipe after use keeps limescale away
- Leave the bath for the full curing time before using it
- Get any chip repaired quickly
- Rinse off hair dye, oils and bath bombs right away
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Our work in Begbroke
Begbroke is about 6 miles north-west of Oxford, in Oxfordshire. We travel to clients in Begbroke, so you do not need to take anything anywhere. We cover 443 places across Oxfordshire, from the larger towns to small villages. You can also see our page for Birmingham, about 51 miles away.
Here we cover the OX5 postcode area. From Woodstock Road, Woodstock Road East and Woodstock Road West or anywhere nearby, a technician can come to you. We also cover the places around Begbroke: Yarnton (1 mile south-east), Thrupp (1 mile north-east), Bladon (1 mile west), Worton (2 miles south-west) and Shipton-on-Cherwell (2 miles north). Further out, we also cover Oxford (6 miles south-east), Didcot (15 miles south), Bicester (9 miles north-east), Abingdon-on-Thames (10 miles south), Witney (8 miles west) and Carterton (12 miles west).
Landmarks near Begbroke
Typical jobs here are in homes near William Fletcher Primary School, Gosford Hill School and Church of St Philip, among other places. The nearest railway station is Oxford Parkway station, about 2.3 miles south-east. Further afield, we also cover the area around Acland Hospital (4.9 miles south-east) and Oxford Bus Museum (2.3 miles west). Open spaces near Begbroke include Hook Meadow and The Trap Grounds.
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access.
What you get with us
- A year’s guarantee on all work
- No need to remove anything
- Typically one visit, start to finish
- Straight answers about what a repair can do
Take a look at our full price list and guide to resurfacing and replacement costs.
Landlord and trade work in Begbroke
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
About our accreditations · Every repair comes with a one-year guarantee.
