Oxfordshire · England
Bath re-enamelling & resurfacing in Worton, Oxfordshire
Fixed-price bath re-enamelling in Worton and the surrounding area, normally in one visit and guaranteed for a year.
- Resurfacing from £350
- A coloured bath you want in white
- An old resurfacing that is failing
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Bath re-enamelling in Worton, done in place
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. We are often asked to fix a roll-top that’s seen better days and a coloured bath you want in white, in cast iron baths, Victorian roll-tops and pressed steel baths.
You get a one-year guarantee, the same in Worton as everywhere else we work.
- Location
- Worton (OX29)
- Region
- Oxfordshire
- Cover
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How it works
We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and the work begins. Allow a full day, and we’ll keep you posted as we go.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s normally ready the day after.
Preparing for the visit
- Clear the area around the damage
- Let us know which floor the room is on
- Point us to the nearest place to park
How to get a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed price back. There is no charge for the quote and no obligation.
Advice
For landlords and businesses
For anyone letting property in or around Worton, we’ll quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Worton and nearby
Worton is about 3 miles south-west of Kidlington, in Oxfordshire. Jobs in Worton are booked in like any other job: a fixed quote from your pictures, and a technician at your door on the day. Worton is one of 443 places in Oxfordshire where we work. Our nearest city page is Birmingham, about 52 miles away.
Jobs in OX29 are booked in the same way as anywhere else. We also cover the places around Worton: Yarnton (1 mile east), Begbroke (2 miles north-east), Bladon (2 miles north), Church Hanborough (2 miles north-west) and Thrupp (3 miles north-east). We also work in nearby towns such as Oxford (6 miles south-east), Didcot (14 miles south), Bicester (10 miles north-east), Abingdon-on-Thames (9 miles south), Witney (7 miles west) and Carterton (11 miles west).
What’s near Worton
Around Worton, we work in homes near Church of St Peter, Bartholomew School and Red Lion pub. The closest station to Worton is Hanborough station, roughly 2.3 miles north-west of the centre. A little further out are Oxford Bus Museum (2.3 miles north-west) and Oxford Castle (4.6 miles south-east). Green spaces nearby include Hook Meadow and The Trap Grounds and Cumnor Hill.
What affects the price in Worton
Prices start from £350. There’s no area surcharge for Worton. What changes the price is:
- Any earlier repairs that need removing first
- Access to the area
- The type of damage
- Doing more than one item at once
Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
How to get a fixed quote
Before you send pictures, these tips help us give you a firm price:
- A coin or ruler next to the damage for scale
- A wider photo showing the whole bath
- Your postcode, so we can check dates
- Any details about the material
If you are in Worton and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Questions from Worton
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
How much does bath re-enamelling cost in Worton?
Prices start from £350. Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your OX29 postcode.
What areas do you cover?
We cover the whole UK, including Worton and the rest of Oxfordshire. Send your postcode with your pictures and we’ll offer you dates.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one, so let us know about it.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
What happens after I send photos?
We come back with a fixed price. You are under no obligation.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders in Worton.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
Keeping it looking good
Once the work has cured, treat it gently:
- Avoid suction-cup mats
- A dripping tap should be fixed promptly
- Use washing-up liquid and a soft cloth
- Don’t leave a chip unrepaired
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
When to call us in Worton
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
The most common problems we’re called about are:
- A coloured bath you want in white
- A period or roll-top bath worth keeping
- Chips and rust in more than one place
- Brown or grey marks that do not clean off
What to look for in a quote
- Whether they match the colour on site
- How to look after the finish
- What the guarantee covers, and for how long
- What preparation is included
Places near Worton
Also in Worton
What a repair can’t fix
A few problems are outside what a surface repair can do:
- Damage hidden under a previous coating, until it’s stripped back
- Plumbing leaks, which need a plumber
- A cast iron or steel bath that is cracked right through
If in doubt, send pictures and we’ll say what we think before you book.
What we work on
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
