Kent · England
Bath re-enamelling & resurfacing in Bekesbourne, Kent
Bath re-enamelling across Bekesbourne and nearby, usually in one visit.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- An outdated colour you’d like to change
When we would advise against a repair
We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- A bath split right through the body
- Steel that has corroded right through
- Acrylic that moves when you stand in it
Not sure? Send photos and we’ll give you a straight answer before booking.
Surfaces we repair
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
Bath re-enamelling in Bekesbourne, done in place
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. If you’re dealing with wear marks under the taps and a peeling or bubbling previous coating, we can help.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Area
- Bekesbourne (CT4)
- Area hub
- Kent
- Warranty
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace in Bekesbourne?
Replacing a bath typically involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and typically one day, and the bath can be used the day after. Prices start from £350. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Rooms protected and left tidy
- CHAS, Constructionline and SafeContractor accredited
- A year’s guarantee on all work
- Typically one visit, start to finish
Take a look at our prices page and guide to resurfacing and replacement costs.
What affects the price in Bekesbourne
Resurfacing from £350. A fixed quote means you know the cost before you book. We look at:
- Any earlier repairs that need removing first
- What kind of damage it is
- How easy the damage is to reach
- How much damage there is
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Getting a price from pictures
When you take your photos, these tips help us give you a firm price:
- Details of any past repairs
- What it’s made of, if you know
- A wider photo showing the entire bath
- Where you are, by postcode
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
About Bekesbourne
Bekesbourne is about 3 miles south-east of Canterbury, in Kent. Jobs in Bekesbourne are booked in like any other job: a fixed quote from photos, then a visit to do the work. Our technicians cover all 922 towns and villages across Kent, from the larger towns to small villages. Our jobs stretch from Bekesbourne to London (56 miles away).
Postcode districts we cover here: CT4. That includes homes on Aerodrome Road, Lysander Close and Adisham Road. We also travel to Patrixbourne (1 mile west), Bekesbourne Hill (1 mile north-west), Bridge (1 mile south-west), Littlebourne (2 miles north) and Adisham (2 miles south-east). Further out, we also cover Ashford (15 miles south-west), Canterbury (3 miles north-west), Margate (13 miles north-east), Dover (10 miles south-east), Folkestone (12 miles south) and Ramsgate (13 miles north-east).
Landmarks near Bekesbourne
Our customers here include homes close to Church of St Peter and St. Anselm's Catholic School, among other places. For rail, the closest station is Bekesbourne station, about 0.8 miles north-west of the centre. A little further out are Whitefriars Shopping Centre (3.5 miles north-west) and St Martins Hospital (2.5 miles north-west).
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
What happens on the day
There is not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. Most visits take most of the day, tidy-up included.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
Preparing for the visit
- Tell us about parking, stairs or access
- Have somewhere for us to park nearby if possible
- Mention if the room is upstairs or in a flat
How to get a price
Send us a photo of the damage and one of the entire item, and tell us you are in Bekesbourne, and we will reply with a fixed quote.
Related advice
Also near Bekesbourne
Also in Bekesbourne
Looking after it afterwards
How the surface is treated afterwards matters:
- Keep toiletries on a shelf rather than in the bath
- Keep suction mats out of the bath
- Get any chip repaired quickly
- A quick wipe after use keeps limescale away
Dry the bath after use if possible, and rinse off any bath products.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Do you need bath re-enamelling in Bekesbourne?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
It’s worth getting a quote if you see:
- Wear marks under the taps
- A bath that stays dull however much you clean it
- A bath in a colour that no longer suits
- A period or roll-top bath worth keeping
Comparing quotes
- What happens if the damage is worse than the pictures show
- What protection goes down before work starts
- How long the guarantee is and what it covers
- A fixed price, and whether VAT is included
FAQs for Bekesbourne
How much does bath re-enamelling cost in Bekesbourne?
Prices start from £350. Because every job differs, we price from photos. You will get a fixed figure before you book.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you resurface freestanding baths?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and you’ll get one combined price.
Which areas do you work in?
Everywhere in the UK, Bekesbourne included. There is no extra charge for travel.
How do I book?
Photos of the damage, a photo of the entire bath and your postcode. Then we’ll agree a date.
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Landlord and trade work in Bekesbourne
If you manage property in Bekesbourne, we will quote for several properties at once. Send pictures for each one and we’ll price them together.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
About our accreditations · Every repair comes with a one-year guarantee.
