Bath and North East Somerset · England
Bath re-enamelling & resurfacing in Belluton, Bath and North East Somerset
Fixed-price bath re-enamelling in Belluton and the surrounding area, usually in one visit and guaranteed for a year.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Stains that won’t shift
Belluton: your questions answered
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside if you’d like.
Do you cover Belluton?
Yes. We work across the UK and come to Belluton. Send us pictures for a fixed quote, or call 0345 017 0787.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed quote based on photos of the damage. Send a close-up and a photo of the entire item with your BS39 postcode.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Bath and North East Somerset.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
Bath re-enamelling in Belluton without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Typical jobs include a period or roll-top bath worth keeping and a peeling or bubbling previous coating, on acrylic baths, basins & shower trays and pressed steel baths.
You’re covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Area
- Belluton (BS39)
- Area hub
- Bath and North East Somerset
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
When to call us in Belluton
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
You may need us if you’ve spotted any of these:
- Wear marks under the taps
- Staining under the taps and around the waste
- Lots of chips and rust spots
- A period or roll-top bath worth keeping
Comparing quotes
- Whether a trained technician does the job
- How changes to the job are handled
- A fixed quote, and whether VAT is included
- How your room will be protected
What a repair cannot fix
A repair isn’t always the answer, and we will tell you before we start. We can’t fix:
- Problems we cannot see until an old finish comes off
- Plumbing leaks, which need a plumber
- Holes rusted through the metal
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Belluton
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
Places near Belluton
More services for Belluton
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Don’t let dyes or oils sit on the finish
- Use washing-up liquid and a soft cloth
- Don’t leave bottles, razors or sponges standing on the surface
- Have chips seen to early
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Belluton and nearby
Belluton is about 3 miles south-west of Keynsham, in Bath and North East Somerset. Clients in Belluton get the same service as everywhere else we cover: a fixed price from your photos, then a visit to do the work. We work in all 136 towns and villages across Bath and North East Somerset, from the larger towns to small villages.
Our visits in BS39 are booked in the same way as anywhere else. That includes homes on Pensford Hill, Belluton Lane and Parsonage Lane. Other places close to Belluton include Pensford (1 mile south-east), Publow (1 mile east), Blackrock (1 mile north), Norton Malreward (1 mile north-west) and Woollard (1 mile east). We also work in nearby towns such as Bath (8 miles east), Keynsham (3 miles north-east), Bathwick (9 miles east), Walcot (9 miles east), Westmoreland (7 miles east) and Kingsmead (8 miles east).
Near you in Belluton
We visit homes around The Traveller's Rest pub, St Thomas à Becket Church and Pensford Primary School and the streets around them. The closest station to Belluton is Keynsham station, about 3.7 miles north-east. Nearby you’ll also find South Bristol Community Hospital (2.8 miles north-west) and Oval enclosure (3.4 miles south). For a walk, there’s Knowle Hill and Hunstrete Lake.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Repair or replace: which is better?
Replacing a bath normally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and typically one day, and the bath can be used the day after. Prices start from £350. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why us?
- Nothing taken out or refitted
- One price list for the whole UK
- Generally one visit, start to finish
- Honest advice, even when it means no job
Take a look at our prices page and guide to resurfacing and replacement costs.
What bath re-enamelling costs
Prices start from £350. You will know the full cost before booking. We look at:
- The colour and finish to match
- Where the damage is and how we get to it
- What the surface is made of
- How many items we do on one visit
What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before booking.
Getting a price from photos
Almost every job we do is priced from pictures. This is what we need:
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
- Any details about the material
- A picture taken from further back
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed price back. There is no charge for the quote and you are under no obligation.
What happens on the day
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which usually takes the best part of a day. If we find something your pictures didn’t show, we will explain it before carrying on.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s usually ready the following day.
Getting ready for the visit
- Open a window if you can
- Avoid using the area for a few hours before we arrive
- Tell us if there are stairs or a lift
How to get a price
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
