Coventry · England
Bath re-enamelling & resurfacing in Benton Green, Coventry
Problem with your bath in Benton Green? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- An old resurfacing that’s failing
- Lots of chips and rust spots
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Leave the bath for the full curing time before using it
- Store bottles off the bath
- Stick to gentle, non-abrasive cleaners
- Keep suction mats out of the bath
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
How we handle bath re-enamelling in Benton Green
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. If you are dealing with a coating lifting around the plughole and an original cast iron bath that needs restoring, we can help.
Every repair is covered by a one-year guarantee.
- Location
- Benton Green (CV7)
- Area hub
- Coventry
- Warranty
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What we do, step by step
You do not need to empty the room. We bring everything we need with us, put protection down and get going once we have agreed what we’re doing. Most jobs take the best part of a day, and you can get on with other things while we are there.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can normally be used the day after.
Before we arrive
- Make sure the area is dry
- Have a window or extractor fan available
- Clear toiletries, mats and anything else from around the area
Ask for a price
To get a price, send a couple of photos through our quote form or call us. We’ll tell you honestly whether it can be repaired.
Related advice
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Our work in Benton Green
Benton Green is about 5 miles north-west of Kenilworth, in Coventry. Jobs in Benton Green are booked in like any other job: a fixed quote from your photos, then a visit to do the work. Benton Green is one of 88 places in Coventry we cover. We work right across the region, from Benton Green to Birmingham (about 12 miles away).
Our visits in CV7 work the same way as everywhere else we cover. Other places close to Benton Green include Reeves Green (1 mile south-east), Berkswell (1 mile west), Four Oaks (1 mile north-west), Wootton Green (2 miles west) and Millison's Wood (2 miles north). Further out, we also cover Coventry (5 miles east), Hillfields (5 miles east), Bishopsgate Green (5 miles east), Radford (5 miles east), Ernesford Grange (7 miles east) and Foleshill (7 miles east).
Landmarks near Benton Green
We visit homes around Tile Hill Wood School, Berkswell Church of England Voluntary Aided Primary School and Church of Saint John the Baptist and the streets around them. The closest station to Benton Green is Berkswell station, roughly 1.1 miles south-west. A little further out are Allesley Castle (2.7 miles east) and Berkswell Village Museum (0.9 miles west). Open spaces near Benton Green include Oxpen Meadow Lake.
Common problems we fix in Benton Green
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Typical reasons for a call-out include:
- A roll-top that is seen better days
- Stains that will not shift
- Lots of chips and rust spots
- Worn patches where water runs and sits
Questions to ask before you book
- Whether cleaning and preparation are in the price
- Is the price fixed, and does it include VAT?
- When it can be used again
- How the colour is matched
What affects the price in Benton Green
Resurfacing from £350. Quotes are free and the price is fixed. What we look at:
- The size and number of damaged areas
- Whether we combine several jobs
- The colour and finish to match
- What kind of damage it is
The price reflects the work involved, not your postcode. You’ll see the full price before booking.
How to get a fixed price
Before you send photos, these tips help us give you a firm price:
- Any details about the material
- A wider photo showing the entire bath
- Something in shot to show the size
- Daylight if possible, and no flash reflection
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Places near Benton Green
Other services in Benton Green
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Repair or replace in Benton Green?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why book with us
- CHAS and Constructionline accredited
- Colours mixed by hand to suit your surface
- Same prices wherever you are
- Honest advice, even when it means no job
Read our pricing or bath cost comparison.
Honest limits
We would rather lose a job than do one that won’t last, so these are the limits:
- A metal bath with a through crack
- Anything hidden under an old coating, until we remove it
- Holes rusted through the metal
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we work on in Benton Green
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
Your questions about bath re-enamelling in Benton Green
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Can tenants book a repair?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Are there extra charges for Benton Green?
Travel is included in the price, with the same prices everywhere we work.
How do I book?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Is my repair covered?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Is there any odour?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.
