West Sussex · England
Bath Re-enamelling in Bepton
Bath re-enamelling across Bepton and nearby, done in a single visit in most cases.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Brown or grey marks that don’t clean off
Bath re-enamelling in Bepton without replacing anything
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. If you’re dealing with enamel that’s lost its shine and feels rough and stains that won’t shift, we can generally put it right.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll sort it.
- Where
- Bepton (GU29)
- Region
- West Sussex
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace in Bepton?
A refit takes several trades and several days. Re-enamelling takes one technician and usually one day, with the bath ready the following day. Our bath re-enamelling starts from £350. Set against the cost of replacement, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why us?
- Same prices wherever you are
- Accredited with CHAS, Constructionline and SafeContractor
- Fixed prices from your pictures
- We’ll tell you if it’s not worth repairing
See our prices page or guide to resurfacing and replacement costs.
How we price bath re-enamelling
Prices start from £350. We don’t charge extra for travel to Bepton. The price depends on:
- Unusual colours or finishes
- What kind of damage it is
- Whether old repairs or coatings need taking off
- How easy the damage is to reach
Our prices are the same across the UK, with no extra for Bepton. The job itself decides the price: how much damage, what it’s made of and how many items.
How to get a fixed quote
You can take the pictures on your phone, there is no need for anything special. Ensure they show:
- Good light, ideally daylight, without flash glare
- Whether it’s been repaired or coated before
- The postcode, so we can plan the visit
- The material, if you know it
If you are in Bepton and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Our work in Bepton
Bepton is about 8 miles south-east of Petersfield, in West Sussex. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. We work in all 371 towns and villages across West Sussex, from the larger towns to small villages. Our jobs stretch from Bepton to London (48 miles away).
All of GU29 is covered, from the main roads to the quietest streets. From Bepton Road and Bugshill Lane or anywhere nearby, a technician can come to you. We also travel to Cocking (1 mile south-east), Bepton Common (2 miles north-east), Cocking Causeway (2 miles north-east), Minsted (2 miles north) and Heyshott Green (2 miles east). Within a short drive, we also cover Bognor Regis (12 miles south), Chichester (8 miles south), Littlehampton (15 miles south-east), Emsworth (10 miles south-west), Rustington (15 miles south-east) and Storrington (14 miles east).
Landmarks near Bepton
In Bepton, that means homes near The Parish Church of St Mary and the streets around them. Well-known places in the area include Lodsworth Castle (4.8 miles east) and Midhurst Community Hospital (3 miles north-east). For a walk, there’s Levin Down and Iping and Stedham Commons.
When we would advise against a repair
Some jobs are not right for a repair, for example:
- Damage hidden under a previous coating, until it’s stripped back
- Steel that has corroded right through
- A bath split right through the body
Send us photos and we’ll tell you honestly before booking.
Materials we work on in Bepton
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
The process
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the job itself takes a full day. At the end we talk you through how soon it can be used and how to look after it.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Before we arrive
- Open a window if you can
- Mention any parking restrictions or tricky access
- Let the surface dry out before the visit
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Advice
Can I fix it myself?
If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Bepton: your questions answered
Do you cover Bepton?
Yes, we do. We send a technician to Bepton for every job, and the price is the same as everywhere else.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Does re-enamelling smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
How do I book?
Just pictures, your postcode and a contact number. On the day, access to the room.
Do you charge for travel?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Can you re-enamel a roll-top bath?
Yes, often. We resurface the inside, and the outside can be refinished too.
How much does bath re-enamelling cost in Bepton?
Resurfacing from £350. We give a fixed quote from your pictures. Send a close-up and a photo of the entire item and your postcode.
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
For landlords and businesses
For anyone letting property in or around Bepton, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
What else we do in Bepton
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Wipe the bath dry after use in hard water areas
- Do not let dyes or oils sit on the finish
- Repair dripping taps early
- Don’t use the bath until it has fully cured
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
About our accreditations · Every repair comes with a one-year guarantee.
