West Sussex · England
Bath re-enamelling & resurfacing in Cocking, West Sussex
Problem with your bath in Cocking? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Wear marks under the taps
- A peeling or bubbling previous coating
Bath re-enamelling at your home in Cocking
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Whether it’s chips and rust in more than one place and a roll-top that’s seen better days, we can help, on Victorian roll-tops, pressed steel baths and basins & shower trays alike.
You are covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Where
- Cocking (GU29)
- Area hub
- West Sussex
- Guarantee
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Honest limits
We will not take on work that will not last, so these are the limits:
- Acrylic that moves when you stand in it
- Plumbing leaks, which need a plumber
- A bath that’s rusted through
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
What bath re-enamelling costs
Prices start from £350. A fixed quote means you know the cost before you book. We take into account:
- The size and number of damaged areas
- How hard the colour is to match
- How easy the damage is to reach
- Any earlier repairs that need removing first
There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Send pictures for a quote
Two or three clear photos are usually enough. Try to include:
- Details of any past repairs
- A clear, close picture of the problem area
- Good light, ideally daylight, without flash glare
- Something in shot to show the size
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes a full day. We tidy up before we leave and let you know when you can use it again.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can generally be used the following day.
Before we arrive
- Let us know if it has been repaired before
- Let us know about parking or access
- Clear toiletries, mats and anything else from around the area
Getting a price
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.
Read more
How to care for the repair
Most damage we see is avoidable. These habits help:
- Never use suction bath mats
- Rinse off hair dye, oils and bath bombs straight away
- Stick to gentle, non-abrasive cleaners
- Leave the bath for the full curing time before using it
A quick rinse and wipe after use helps, especially in hard water areas, so limescale can’t build up.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Signs you need bath re-enamelling in Cocking
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Typical reasons for a call-out include:
- Several chips and rust patches
- An outdated colour you’d like to change
- Stains that won’t shift
- Enamel that is lost its shine and feels rough
Before you book anyone
- How the room is protected while they work
- Whether they match the colour on site
- Is the price fixed, and does it include VAT?
- How to care for the finish
Should you replace it?
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Resurfacing renews the entire surface without moving it. Prices start from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Why book with us
- Fixed prices from your pictures
- Work done at your home or business
- No need to remove anything
- We will tell you if it’s not worth repairing
Take a look at our prices page and bath cost comparison.
Cocking: your questions answered
How much does bath re-enamelling cost in Cocking?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Removing the old finish takes extra time, which we include in the price.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
What happens once I’ve sent photos?
We look at the pictures and reply with a fixed price and some dates. If we need another angle, we’ll ask.
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Places near Cocking
Other services in Cocking
Covering Cocking
Cocking is about 8 miles north of Chichester, in West Sussex. We travel to clients in Cocking, so there is no workshop to go to. Cocking is one of 371 places in West Sussex where we work. Our jobs stretch from Cocking to London (47 miles away).
Here we cover the GU29 postcode area. From Bell Lane, The Croft and Cherry Close or a nearby road, we can come to you. Close by, we cover Bepton (1 mile north-west), Heyshott Green (1 mile north-east), Cocking Causeway (1 mile north), Heyshott (1 mile east) and Bepton Common (2 miles north). Larger places within reach include Bognor Regis (12 miles south), Chichester (8 miles south), Selsey (15 miles south), Littlehampton (14 miles south-east), Emsworth (11 miles south-west) and Rustington (14 miles south-east).
Near you in Cocking
Around Cocking, we work in homes near St Catherine of Siena Church, among other places. Other landmarks nearby include Midhurst Community Hospital (3 miles north) and Midhurst Museum (2.5 miles north). The countryside around Cocking includes Levin Down and Iping and Stedham Commons.
About our accreditations · Every repair comes with a one-year guarantee.
