Dorset · England
Bath Re-enamelling in Bere Regis
Bath re-enamelling in Bere Regis without the cost of replacing. Get a fixed price from your photos, then we come to you.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A dull, rough surface that will not come clean
Bath re-enamelling at your home in Bere Regis
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. Our repair technicians work on pressed steel baths, basins & shower trays and cast iron baths, and people most often call us about a coating lifting around the plughole and an original cast iron bath that needs restoring.
The work is covered for a year after we finish. Just call us if there is a problem and we will sort it.
- Where
- Bere Regis (BH20)
- County
- Dorset
- Warranty
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
For anyone letting property in or around Bere Regis, we can repair and quote for several addresses together. Send photos for each one and we will price them together.
Bere Regis and the surrounding area
Bere Regis is about 8 miles south of Blandford Forum, in Dorset. Across the BH20 area, a technician comes to you. Our repair technicians cover all 462 towns and villages in Dorset, from the larger towns to small villages.
Every address in BH20 is covered, from the main roads to the quietest streets. That includes homes on Manor Farm Road, Old Barn Road and Turberville Road. We also travel to Shitterton (1 mile west), Lane End (1 mile south), Throop (2 miles south-west), Warren (2 miles south) and Briantspuddle (2 miles south-west). Within a short drive, we also cover Weymouth (14 miles south-west), Dorchester (10 miles west), Wimborne Minster (11 miles east), Blandford Forum (8 miles north), Ferndown (15 miles east) and Broadstone (10 miles east).
Near you in Bere Regis
Locally, our jobs take us to homes close to Bere Regis Primary and Preschool, The Drax Arms and Parish Church of St John the Baptist, among other places. The nearest railway station is Wool station, roughly 5 miles south. A little further out are Tolpuddle Martyrs Museum (3.6 miles west). For a walk, there’s Black Hill.
Bere Regis questions
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
How much does bath re-enamelling cost in Bere Regis?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Will the price change on the day?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
How long will the bath be out of use?
Generally one day, with the bath ready the day after. A badly pitted bath can need a second day.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
What we do, step by step
We agree an arrival time beforehand, so you know when to expect us. On site, it takes the best part of a day in most cases. The room is left tidy and you will know when it can be used.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Keep a parking space free if you can
- Ensure the area is dry
- Mention any earlier repairs or resurfacing
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Read more
Honest limits
Not everything can be repaired, and we will tell you before we start. Repairs will not solve:
- Steel that has corroded right through
- Leaking taps or wastes (a plumber’s job)
- A metal bath with a through crack
Not sure? Send pictures and we will give you a straight answer before you book.
What we work on
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Repairing versus replacing in Bere Regis
Replacing the bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing gives the bath a new finish without moving it. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why book with us
- A fixed quote before booking
- Straight answers about what a repair can do
- No extra charge for your area
- Accredited with CHAS, Constructionline and SafeContractor
Read our full price list or bath cost comparison.
Prices and what affects them
Prices start from £350. We price every job individually. The main factors are:
- Where the damage is and how we get to it
- What kind of damage it is
- Unusual colours or finishes
- Previous DIY repairs that have to come out
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Quotes from your pictures
You can take the pictures on your phone, there is no need for anything special. Just make sure we can see:
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
Most customers in Bere Regis get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Nearby places to Bere Regis
Other services in Bere Regis
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Repair dripping taps early
- Do not leave a chip unrepaired
- Store bottles off the bath
- Avoid suction-cup mats
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
About our accreditations · Every repair comes with a one-year guarantee.
