Dorset · England

Bath re-enamelling & resurfacing in Warren, Dorset

We travel to Warren for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.

  • Resurfacing from £350
  • Staining under the taps and around the waste
  • An outdated colour you’d like to change
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Warren

Repair or replace: which is better?

Replacing a bath generally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Our bath re-enamelling starts from £350. Set against the cost of replacement, repairing generally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

Why us?

  • Accredited with CHAS, Constructionline and SafeContractor
  • No extra charge for your area
  • Most jobs done in one visit
  • We will tell you if it’s not worth repairing

Read our prices page and bath cost comparison.

Bath re-enamelling in Warren, done in place

We re-enamel plenty of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Whether it’s a bath that stays dull however much you clean it and a coloured bath you want in white, we can normally put it right, on pressed steel baths, cast iron baths and acrylic baths alike.

You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it.

Basin with yellowed glaze resurfaced to a clean white finish
Location
Warren (BH20)
Area hub
Dorset
Warranty
12 months on all our work
Quotes
From £350. Free, fixed quote from pictures
Telephone
0345 017 0787
Updated
23 October 2026

How we price bath re-enamelling

Resurfacing from £350. A fixed quote means you know the cost before you book. We look at:

  • Doing more than one item at once
  • What kind of damage it is
  • Any earlier repairs that need removing first
  • The colour and finish to match

No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Getting a price from photos

Almost every job we do is priced from pictures. This is what we need:

  • Daylight if possible, and no flash reflection
  • Whether it’s been repaired or coated before
  • A close-up of the damage, in focus
  • What it’s made of, if you know

Most clients in Warren get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

Should I try a DIY kit first?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

Common questions in Warren

What information do you need?

Some pictures, your postcode and how to reach you. On the day, access to the room.

What areas do you cover?

The entire UK, including all of Dorset. Just include your postcode and we will offer you dates.

Someone resurfaced my bath and it’s peeling. Can you help?

Typically, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.

Can landlords book you?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Dorset.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

How soon can you come?

We will give you dates with your quote. Tell us if you need it done quickly.

Do I need to be at home?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Do you come to Warren?

Yes. We work across the UK and travel to Warren and the rest of Dorset. Send photos and we’ll quote, or call 0345 017 0787.

Do you need bath re-enamelling in Warren?

Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.

Send us a picture if you notice any of these:

  • Lots of chips and rust spots
  • A bath that stays dull however much you clean it
  • A period or roll-top bath worth keeping
  • A coloured bath you want in white

What to look for in a quote

  • When it can be used again
  • What happens if the damage is worse than the photos show
  • Whether they match the colour on site
  • The length of the guarantee and what it covers

10 questions to ask before you book

How it works

We work cleanly and quietly. Protection goes down first, then the work takes the best part of a day. At the end we talk you through the curing time and the aftercare.

  1. We mask and protect the room and ventilate it.
  2. We clean and degrease the bath and repair any chips or rust.
  3. We key the surface and put on a bonding primer.
  4. Several coats of new finish are sprayed on.
  5. We leave it to cure, and it’s generally ready the day after.

Getting ready for the visit

  • Let us know which floor the room is on
  • Keep children and pets away from the room on the day
  • Let the surface dry out before the visit

Ask for a price

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.

Get a free quote

Read more

What your bath is made of matters

Acrylic

We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Where we work around Warren

Warren is about 10 miles south of Blandford Forum, in Dorset. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in all 462 towns and villages across Dorset.

Jobs in BH20 work the same way as everywhere else we cover. Neighbouring places we cover include Lane End (1 mile north), Throop (2 miles north-west), Bere Regis (2 miles north), Shitterton (2 miles north) and Briantspuddle (2 miles west). Further out, we also cover Weymouth (13 miles south-west), Dorchester (10 miles west), Wimborne Minster (12 miles north-east), Blandford Forum (10 miles north), Ferndown (15 miles east) and Broadstone (10 miles east).

Near you in Warren

The nearest railway station is Wool station, roughly 3 miles south of the centre. Further afield, we also cover the area around Wareham Community Hospital (4.9 miles south-east). Green spaces nearby include Tadnoll and Winfrith Heath and Black Hill.

Map of Warren © OpenStreetMap contributors

Keeping it looking good

Simple care helps the repair last. Our advice:

  • Do not leave a chip unrepaired
  • Dry the bath after use to stop limescale
  • Keep suction mats out of the bath
  • Leave the bath for the full curing time before using it

Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.

Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.

When we would advise against a repair

In fairness, there are a few things a repair won’t fix:

  • Damage hidden under a previous coating, until it’s stripped back
  • A poorly supported acrylic bath, until it’s firmed up
  • A cast iron or steel bath that is cracked right through

Not sure? Send pictures and we will give you a straight answer before you book.

What we work on

  • Cast iron baths
  • Pressed steel baths
  • Basins & shower trays
  • Acrylic baths
  • Victorian roll-tops
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.