Wrexham · Wales
Bath re-enamelling & resurfacing in Bersham, Wrexham
Bath re-enamelling in and around Bersham: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A bath that stays dull however much you clean it
Bath re-enamelling in Bersham without replacing anything
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Whether it’s several chips and rust patches and a dull, rough surface that won’t come clean, we can typically put it right.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Bersham (LL14)
- County
- Wrexham
- Cover
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
What affects the price in Bersham
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- Previous DIY repairs that have to come out
- How many items we do on one visit
- How hard the colour is to match
- The size and number of damaged areas
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.
Quotes from your photos
Almost every job we do is priced from pictures. This is what we need:
- A coin or ruler next to the damage for scale
- Your postcode, so we can check dates
- The material, if you know it
- Daylight if possible, and no flash reflection
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
The process
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Plan for most of the day from start to finish. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Tell us about any previous repairs or coatings
- Keep a parking space free if you can
- Keep pets and children out of the room while we work
How to get a price
The quickest way to a price is to send two or three photos using our quote form or call us. We will tell you honestly whether it can be repaired.
Advice
What we’re called out for in Bersham
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, normally first under the taps and around the waste.
Signs it’s time to call us include:
- An old resurfacing that is failing
- Chips and rust in more than one place
- An original cast iron bath that needs restoring
- A dull, rough surface that will not come clean
What to look for in a quote
- What the guarantee covers, and for how long
- Is the price fixed, and does it include VAT?
- What happens if the damage is worse than the photos show
- How soon you can use it again
What a repair can’t fix
A repair isn’t always the answer, and we’d rather say so up front. We cannot fix:
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
- Steel that has corroded right through
Send us photos and we will tell you honestly.
What we work on
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Keeping it looking good
Looking after the surface is easy:
- Keep suction mats out of the bath
- Get any chip repaired quickly
- Wipe the bath dry after use in hard water areas
- Fix dripping taps quickly
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Bersham and nearby
Bersham is about 2 miles south-west of Wrexham, in Wrexham. Jobs in Bersham are booked in like any other job: a fixed quote from your pictures, and a technician at your door on the day. Bersham is one of 115 towns and villages in Wrexham we cover. You can also see our page for Liverpool, about 26 miles away.
We work across LL14 and the streets around it. Close by, we cover Ddol (1 mile north-east), Rhostyllen (1 mile south-east), Pentre Bychan (1 mile south), Offa (1 mile north-east) and Talwrn (1 mile south-west). Further out, we also cover Acton (3 miles north-east), Little Acton (3 miles north-east), Gwersyllt (3 miles north), Llay (4 miles north), Gresford (5 miles north-east) and Rhosnesni (3 miles north-east).
Near you in Bersham
In Bersham, that means homes near Bellevue Park, Church of the Holy Trinity and Rhostyllen C.P. School and the streets around them. You will also find The Swan Inn (under half a mile south-east) and Ysgol Clywedog (1 mile north-east). For rail, the closest station is Wrexham Central station, about 1.5 miles north-east. Other landmarks nearby include Bersham Ironworks and Heritage Centre (less than half a mile north-west) and Tŷ Pawb (1.8 miles north-east). For a walk, there’s Bersham Bank and Monks Pool.
Also near Bersham
Also in Bersham
Questions from Bersham
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
How long is the bath unusable?
Most baths are done in a day, ready the following day. We give you timings with the quote.
Is there any odour?
There may be a mild smell during the work.
How durable is a resurfaced bath?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Do you resurface freestanding baths?
Yes. Inside and out.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Do you come to Bersham?
Yes. We work across the UK and travel to Bersham and the rest of Wrexham. Send pictures and we’ll quote, or call 0345 017 0787.
What information do you need?
Use the quote form or ring 0345 017 0787.
Landlords, agents and businesses in Bersham
We work for landlords, letting agents and housing providers in Bersham as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
If you manage property in Bersham, we’ll quote for several properties at once. Send photos for each one and we’ll price them together.
About our accreditations · Every repair comes with a one-year guarantee.
