Wrexham · Wales
Bath Re-enamelling for New Broughton homes
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in New Broughton. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Thin, worn enamel in places
- An outdated colour you’d like to change
New Broughton and nearby
New Broughton is about 2 miles west of Wrexham, in Wrexham. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We cover 115 places across Wrexham. You can also see our page for Liverpool, about 25 miles away.
All of LL11 is covered. From Chapel Road, Weston Road and Lower Mill Drive or anywhere nearby, a technician can come to you. Nearby, we also work in Highfield (1 mile north-east), Southsea (1 mile north-west), Stansty (1 mile east), Brynteg (1 mile north-west) and Plas Coch (1 mile east). Larger places within reach include Rhosllannerchrugog (3 miles south), Pentredŵr (3 miles south), Llay (3 miles north-east), Pant (4 miles south), Gresford (4 miles north-east) and Johnstown (3 miles south).
What’s near New Broughton
Typical jobs here are in homes near Ysgol Penrhyn New Broughton Primary, The Halfway Inn and Bellevue Park, among other places. Other local landmarks include Ysgol Bryn Alyn (1.4 miles north), Ysgol Clywedog (1.1 miles south-east) and Berse Drelincourt Church (under half a mile south-east). For rail, the closest station is Wrexham General station, roughly 1.2 miles east. A little further out are Wrexham Maelor Hospital (1 mile south-east) and Bersham Ironworks and Heritage Centre (1.3 miles south). Green spaces nearby include Brymbo Pool and Cefn.
Bath re-enamelling in New Broughton without replacing anything
Re-enamelling is a one-day job for most baths. Taps, tiles, panels and plumbing all stay in place. We’re frequently asked to fix staining under the taps and around the waste and a coating lifting around the plughole, on cast iron baths, basins & shower trays and pressed steel baths.
A one-year guarantee comes as standard.
- Where
- New Broughton (LL11)
- Area hub
- Wrexham
- Guarantee
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Aftercare tips
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- A dripping tap should be fixed promptly
- Get any chip repaired quickly
- A quick wipe after use keeps limescale away
- Don’t use the bath until it has fully cured
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
What we cannot put right
Not everything can be repaired, and we would rather say so up front. Repairs won’t solve:
- Plumbing leaks, which need a plumber
- Anything hidden under an old coating, until we remove it
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send pictures and we will give you a straight answer before booking.
Surfaces we repair
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
How the visit works
There’s not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. Most visits take a full day, including clearing up.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Open a window if you can
- Have somewhere for us to park nearby if possible
- Keep pets and children out of the room while we work
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Advice
Your questions about bath re-enamelling in New Broughton
What if the damage is worse than the pictures show?
The price is fixed for what the photos show. If there is more, we will tell you before starting.
How durable is a resurfaced bath?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Which areas do you work in?
We cover the whole UK, including New Broughton and the rest of Wrexham. Send your postcode with your photos and we’ll confirm dates.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
How long will the bath be out of use?
Typically one day, with the bath ready the next day. Deeply pitted baths may need a second day.
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed price from your photos. Send a close-up and a picture of the whole item with your LL11 postcode.
Is my repair covered?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
How do I book?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
For landlords and businesses
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
When to call us in New Broughton
A dull surface stains and holds dirt, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
Look out for any of the following:
- A roll-top that’s seen better days
- Wear marks under the taps
- Stains that won’t shift
- Lots of chips and rust spots
Questions to ask before you book
- Whether the price covers travel
- Whether cleaning and preparation are in the price
- Aftercare advice
- The length of the guarantee and what it covers
Repair or replace: which is better?
Replacing a bath usually involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and usually one day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before you book.
Why us?
- Nothing taken out or refitted
- One visit for most repairs
- Rooms protected and left tidy
- One-year guarantee on every repair
Read our pricing and resurfacing vs replacement cost guide.
Also in New Broughton
About our accreditations · Every repair comes with a one-year guarantee.
