Lancashire · England
Bath re-enamelling & resurfacing in Bescar, Lancashire
Bath re-enamelling for Bescar, without a refit. Get a fixed quote from your pictures, then book a visit.
- Resurfacing from £350
- An old resurfacing that’s failing
- Worn patches where water runs and sits
Bath re-enamelling in Bescar without replacing anything
We do not move the bath, so your taps, tiles and plumbing are left alone. It generally takes one visit, with the bath ready to use the following day. We work on acrylic baths, Victorian roll-tops and cast iron baths, and people most often call us about a period or roll-top bath worth keeping and a coloured bath you want in white.
A one-year guarantee comes as standard, so you are not left on your own once we have gone.
- Location
- Bescar (L40)
- County
- Lancashire
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Honest limits
A repair isn’t always the answer, and we’ll tell you before we start. Repairs will not solve:
- Problems we can’t see until an old finish comes off
- Acrylic that moves when you stand in it
- Leaks from fittings rather than the bath
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
Repair or replace: which is better?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Prices start from £350. Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why us?
- We come to you, anywhere in the UK
- Dust sheets down, tidy finish
- Free fixed quotes from pictures
- Honest advice, even when it means no job
See our full price list or bath cost comparison.
Nearby places to Bescar
Also in Bescar
Common problems we fix in Bescar
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Customers normally contact us about:
- Several chips and rust patches
- A dull, rough surface that won’t come clean
- Worn patches where water runs and sits
- A coloured bath you want in white
What your quote should include
- The length of the guarantee and what it covers
- If travel is included in the price
- What happens if they find more damage
- Who turns up on the day
Aftercare tips
Good habits make a big difference to how long a repair lasts:
- Have chips seen to early
- Wash away dyes and oils after use
- Stick to gentle, non-abrasive cleaners
- Respect the curing time we give you
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
Work for landlords and builders
For anyone letting property in or around Bescar, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
How it works
On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to a full day, tidy-up included.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Clear the area around the damage
- Tell us about parking, stairs or access
- Have a window or extractor fan available
How to get a price
You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Advice
Where we work around Bescar
Bescar is about 4 miles north of Ormskirk, in Lancashire. Book a date that suits you, and you will know when to expect us, so there is no waiting around. Bescar is one of 482 towns and villages in Lancashire where we work. Our nearest city page is Liverpool, about 14 miles away.
Every address in L40 is within our area. We regularly work on streets such as Hall Road, Hillock Lane and Hillock Close and the roads around them. Neighbouring places we cover include Drummersdale (1 mile south-east), Scarisbrick (1 mile west), Snape Green (1 mile north-west), Jack's Mere (1 mile west) and Carr Cross (2 miles west). We also work in nearby towns such as Preston (14 miles north-east), Chorley (12 miles east), Lytham St Anne's (10 miles north), Bamber Bridge (13 miles north-east), Leyland (11 miles north-east) and Fulwood (14 miles north-east).
What’s near Bescar
Locally, our jobs take us to homes close to Morris Dancers pub, Roman Catholic Church of St Elizabeth and St Mary's Catholic Primary School. For rail, the closest station is Bescar Lane station, about 0.7 miles north of the centre. A little further out are British Lawnmower Museum (4 miles north-west) and Southport and Formby District General Hospital (2.8 miles north-west). The countryside around Bescar includes WWT Martin Mere and Martin Mere.
Prices and what affects them
Resurfacing from £350. We give every job a fixed price from pictures. This is what makes a difference:
- How many areas need work
- Previous DIY repairs that have to come out
- How hard the colour is to match
- The material
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Send pictures for a quote
When you take your photos, a few simple things make all the difference:
- A clear, close picture of the problem area
- The material, if you know it
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
Most customers in Bescar get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Bescar questions
What happens after I send photos?
We review the pictures and send a fixed quote with dates.
Does re-enamelling smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
How much does bath re-enamelling cost in Bescar?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before booking.
Can you repair several things at once?
Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Can you quote from photos?
Nearly always. If photos don’t show enough, we will ask for another angle.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. The old coating comes off before we resurface it. Mention it when you send photos.
About our accreditations · Every repair comes with a one-year guarantee.
