East Riding of Yorkshire · England
Bath re-enamelling & resurfacing in Bentley, East Riding of Yorkshire
Problem with your bath in Bentley? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- A roll-top that is seen better days
- Staining under the taps and around the waste
Bath re-enamelling in Bentley, done in place
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. We’re often asked to fix thin, worn enamel in places and a bath that stays dull however much you clean it, on cast iron baths, Victorian roll-tops and basins & shower trays.
Every repair comes with a one-year guarantee, wherever you are in East Riding of Yorkshire.
- Area
- Bentley (HU17)
- Area hub
- East Riding of Yorkshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Do you need bath re-enamelling in Bentley?
A dull surface stains and holds dirt, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
Common reasons people in Bentley contact us are:
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
- Wear marks under the taps
- Staining under the taps and around the waste
Comparing quotes
- How long it needs to cure
- How your room will be protected
- What prep work is covered
- What aftercare is recommended
Places near Bentley
What else we do in Bentley
Looking after it afterwards
Much of the damage we repair could have been avoided. These habits help:
- Leave the bath for the full curing time before using it
- Dry the bath after use to stop limescale
- Never use suction bath mats
- Do not leave bottles, razors or sponges standing on the surface
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
How it works
Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, do the job and clear up. Allow a full day from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Before we arrive
- Mention if the room is upstairs or in a flat
- Plan for the room to be out of bounds to pets and children
- Mention any parking restrictions or tricky access
Get a quote
If you are in Bentley and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Advice
Bentley questions
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can you resurface a pink bath in white?
Yes, most people go for white. Mention the colour you want when you send photos.
Do you come to Bentley?
Yes. We cover the whole UK and come to Bentley. Send us photos for a fixed quote, or call 0345 017 0787.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Is a repair better than a new one?
Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Bentley.
How soon can you come?
We will give you dates with your quote. Tell us if you need it done quickly.
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
For landlords and businesses
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll arrange it.
Repair or replace in Bentley?
Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling gives the bath a new finish without moving it. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not your postcode. The full price is agreed before booking, with nothing added on the day.
What you get with us
- Repair technicians who travel to you, UK-wide
- One visit for most repairs
- Same prices wherever you are
- Everything repaired in place
See our prices page and resurfacing vs replacement cost guide.
What bath re-enamelling costs
Prices start from £350. You will not pay by the hour. The price is based on:
- The material
- Whether old repairs or coatings need taking off
- How much damage there is
- How many items we do on one visit
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Getting a price from pictures
Before you send photos, these tips help us give you a firm price:
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
- A photo taken from further back
- Any details about the material
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Where we work around Bentley
Bentley is about 2 miles south-west of Beverley, in East Riding of Yorkshire. Anywhere in HU17, a technician comes to you. Our technicians cover 299 places in East Riding of Yorkshire. Our jobs stretch from Bentley to Leeds (45 miles away).
Every address in HU17 is within our area. Neighbouring places we cover include Broadgate (1 mile north-west), Walkington (2 miles north-west), Beverley (2 miles north-east), Bishop Burton (3 miles north-west) and Molescroft (3 miles north). We also work in nearby towns such as Driffield (14 miles north), Hessle (6 miles south), Hornsea (14 miles north-east), Market Weighton (9 miles west), Brough (7 miles south-west) and Hedon (12 miles south-east).
Local landmarks in Bentley
In Bentley, that means homes near Cottingham High School and Sixth Form College, among other places. For rail, the closest station is Beverley station, roughly 2.6 miles north-east of the centre. A little further out are Humberside (2 miles west) and Skidby Windmill And Museum of East Riding Life (1.5 miles south).
What a repair cannot fix
A few problems are outside what a surface repair can do:
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
- Problems we cannot see until an old finish comes off
If in doubt, send pictures and we will say what we think before you book.
What we work on
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
