Kent · England
Bath re-enamelling & resurfacing in Tunstall, Kent
Bath re-enamelling for Tunstall, without a refit. Get a fixed price from your pictures, then we come to you.
- Resurfacing from £350
- A roll-top that’s seen better days
- An outdated colour you’d like to change
About our bath re-enamelling in Tunstall
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. If you are dealing with worn patches where water runs and sits and a coating lifting around the plughole, we can typically put it right, on cast iron baths, basins & shower trays and pressed steel baths alike.
Big or small, it’s backed by a one-year guarantee.
- Where
- Tunstall (ME9)
- County
- Kent
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace: which is better?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- Most jobs done in one visit
- Honest advice, even when it means no job
- No extra charge for your area
Read our full price list or guide to resurfacing and replacement costs.
Landlord and trade work in Tunstall
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Aftercare tips
Good habits make a big difference to how long a repair lasts:
- Keep suction mats out of the bath
- Rinse off hair dye, oils and bath bombs immediately
- Store bottles off the bath
- Clean with a soft cloth and mild detergent
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
When to call us in Tunstall
Hard water speeds up the wear, and abrasive cleaners do the most damage.
It’s worth getting a quote if you see:
- Worn patches where water runs and sits
- Enamel that’s lost its shine and feels rough
- A period or roll-top bath worth keeping
- A bath in a colour that no longer suits
What to look for in a quote
- What protection goes down before work starts
- What happens if the damage is worse than the pictures show
- Aftercare advice
- How long the guarantee is and what it covers
What we do, step by step
We agree an arrival time beforehand, so you’re not left guessing. On site, it takes the best part of a day for most jobs. The room is left tidy and you will know when it can be used.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Clear the area around the damage
- Let the surface dry out before the visit
- Let us know if it has been repaired before
Getting a price
The quickest way to a price is to send two or three pictures through our quote form or call us. We will say right away whether it can be repaired.
Advice
When we would advise against a repair
A repair is not always the answer, and we’ll tell you before we start. We cannot fix:
- Leaking taps or wastes (a plumber’s job)
- Problems we cannot see until an old finish comes off
- A cast iron or steel bath that’s cracked right through
Send us photos and we will tell you honestly.
What we work on
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
Tunstall: your questions answered
Can I get a quote without a visit?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you work in Tunstall?
Yes, we do. We send a technician to Tunstall for every job, and the price is the same as everywhere else.
Does re-enamelling smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
How much does bath re-enamelling cost in Tunstall?
Resurfacing from £350. We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo with your ME9 postcode.
Is there a call-out fee?
We do not add a call-out fee. Your fixed quote includes everything.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
About Tunstall
Tunstall is about 1 mile south-west of Sittingbourne, in Kent. From the centre of Tunstall to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in 922 places across Kent, from the larger towns to small villages. You can also see our page for London, about 37 miles away.
Our repair technicians cover all of ME9. Neighbouring places we cover include Heart's Delight (1 mile north-west), Borden (1 mile north-west), Highsted (1 mile east), Rodmersham Green (1 mile east) and Sittingbourne (1 mile north-east). Within a short drive, we also cover Maidstone (9 miles south-west), Ashford (14 miles south-east), Whitstable (14 miles east), Faversham (7 miles east), Minster (7 miles north-east) and Kings Hill (14 miles west).
Around Tunstall
Our clients here include homes close to Church of St John the Baptist, Fulston Manor School and Tunstall Church of England (Aided) Primary School. The nearest railway station is Sittingbourne station, about 1.4 miles north-east of the centre. Further afield, we also cover the area around Sittingbourne Heritage Museum (1.4 miles north-east) and Sittingbourne and Milton Urban District (1.9 miles north).
Towns and villages near Tunstall
More services for Tunstall
How we price bath re-enamelling
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- Any earlier repairs that need removing first
- The type of damage
- What the surface is made of
- Access to the area
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send pictures for a quote
Phone pictures are fine, there is no need for anything special. Just ensure we can see:
- A clear, close picture of the problem area
- Whether it’s been repaired or coated before
- Where you are, by postcode
- A coin or ruler next to the damage for scale
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you’re under no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
