Kent · England
Bath re-enamelling & resurfacing in Biddenden, Kent
Fixed-price bath re-enamelling in Biddenden and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Lots of chips and rust spots
Repairs by material
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Bath re-enamelling at your home in Biddenden
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Whether it’s a dull, rough surface that won’t come clean and a period or roll-top bath worth keeping, we can generally put it right.
Every repair comes with our one-year guarantee, wherever you are in Kent.
- Where
- Biddenden (TN27)
- Region
- Kent
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Signs you need bath re-enamelling in Biddenden
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Most people contact us after spotting something like this:
- An original cast iron bath that needs restoring
- Brown or grey marks that don’t clean off
- A coating lifting around the plughole
- Enamel that’s lost its shine and feels rough
Questions to ask before booking
- Who turns up on the day
- The length of the guarantee and what it covers
- What protection goes down before work starts
- Aftercare advice
Nearby places to Biddenden
Also in Biddenden
Repair or replace: which is better?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
What you get with us
- One visit for most repairs
- Fixed prices from your pictures
- We come to you, anywhere in the UK
- No need to remove anything
Read our full price list and bath cost comparison.
Landlord and trade work in Biddenden
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
About Biddenden
Biddenden is about 10 miles west of Ashford, in Kent. Jobs in Biddenden are booked in like any other job: a fixed price from your pictures, and a technician at your door on the day. We work in all 922 towns and villages across Kent. Our nearest city page is London, about 41 miles away.
Postcode districts we cover here: TN27. Streets in the area include High Street, The Meadows and Cloth Hall Gardens, and we cover them all. Neighbouring places we cover include Curteis' Corner (1 mile north-east), Woolpack Corner (1 mile south-east), Standen (1 mile north-east), Hareplain (1 mile north-west) and Stede Quarter (1 mile east). Within a short drive, we also cover Maidstone (11 miles north-west), Ashford (10 miles east), Kings Hill (15 miles north-west), Foley Park (12 miles north-west), Paddock Wood (12 miles west) and Tenterden (4 miles south-east).
What’s near Biddenden
In Biddenden, that means homes near John Mayne Church of England Primary School, The Red Lion Inn and Parish Church of All Saints, among other places. Biddenden’s nearest station is Headcorn station, roughly 3.5 miles north of the centre. Nearby you’ll also find Benenden Hospital (2.3 miles south-west) and Sissinghurst Castle (2.6 miles west).
What happens on the day
Arrival times are agreed in advance. On site, it takes most of the day. We leave the room clean.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Open a window if you can
- Point us to the nearest place to park
- Tell us about parking, stairs or access
How to get a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price the same day in most cases.
Related advice
Keeping it looking good
Much of the damage we repair could have been avoided. These habits help:
- Keep suction mats out of the bath
- Wash away dyes and oils after use
- A dripping tap should be fixed promptly
- Leave the bath for the full curing time before using it
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and don’t leave bottles or razors standing on the surface.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
Biddenden questions
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Do you come to Biddenden?
We do. Repair technicians travel to Biddenden from across the region, and the price is the same as everywhere else.
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
How long is the bath unusable?
Typically one day, with the bath ready the following day. Deeply pitted baths may need a second day.
DIY kit or professional repair?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.
What we can’t put right
We will always be straight with you, so here’s what a repair cannot fix:
- A metal bath with a through crack
- A bath that’s rusted through
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
