Kent · England
Bath Re-enamelling in Stede Quarter
Full bath re-enamelling and resurfacing at your home in Stede Quarter, with a one-year guarantee on every repair.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Staining under the taps and around the waste
Bath re-enamelling in Stede Quarter without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. If you are dealing with a dull, rough surface that won’t come clean and brown or grey marks that don’t clean off, we can help, whatever the material.
All our work is covered by our one-year guarantee, wherever you are in Kent.
- Area
- Stede Quarter (TN27)
- Area hub
- Kent
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
About Stede Quarter
Stede Quarter is about 9 miles west of Ashford, in Kent. Anywhere in TN27, we carry out the work at your property. Our repair technicians cover all 922 towns and villages across Kent. You can also see our page for London, about 42 miles away.
Our visits in TN27 are booked in the same way as anywhere else. Nearby, we also work in Woolpack Corner (1 mile south-west), Curteis' Corner (1 mile north-west), Biddenden (1 mile west), Standen (1 mile north-west) and Durrant Green (1 mile south-east). Further out, we also cover Maidstone (12 miles north-west), Ashford (9 miles east), Foley Park (13 miles north-west), Paddock Wood (13 miles west), Tenterden (3 miles south) and Bearsted (12 miles north).
Local landmarks in Stede Quarter
In Stede Quarter, that means homes near Wattle Wood and the streets around them. Stede Quarter’s nearest station is Headcorn station, roughly 4 miles north-west. Further afield, we also cover the area around Benenden Hospital (3.1 miles south-west) and Kent Firefighting Museum (2.9 miles north-west).
When a repair is not the answer
A repair is not right for every job, for example:
- Acrylic that moves when you stand in it
- A metal bath with a through crack
- Holes rusted through the metal
Send us photos and we will tell you honestly.
Materials we work on in Stede Quarter
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
Signs you need bath re-enamelling in Stede Quarter
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
If you can see any of these, send us a picture:
- Stains that won’t shift
- Lots of chips and rust spots
- An old resurfacing that is failing
- Enamel that’s lost its shine and feels rough
What to look for in a quote
- How long it needs to cure
- Whether a trained technician does the job
- How the colour is matched
- How your room will be protected
What bath re-enamelling costs
Resurfacing from £350. A fixed quote means you know the cost before booking. We look at:
- How many areas need work
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- Unusual colours or finishes
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
A couple of clear pictures is all it takes. Try to include:
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
- Your postcode, so we can check dates
- Whether it’s been repaired or coated before
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.
Nearby places to Stede Quarter
Also in Stede Quarter
Work for landlords and builders
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
Questions from Stede Quarter
Will the price change on the day?
The price is fixed for what the photos show. If there’s more, we will tell you before starting.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Does the bath have to be removed?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Is there a smell?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
Is there a call-out fee?
There’s no separate call-out charge. Your fixed quote includes everything.
How soon can you come?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
The process
Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes most of the day, and the room is left clean and tidy.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s usually ready the next day.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Let us know if it has been repaired before
- Let us know which floor the room is on
How to get a price
To get a price, send two or three pictures using our quote form or ring us. We’ll say immediately whether it can be repaired.
Read more
Repair or replace in Stede Quarter?
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Re-enamelling gives the bath a new finish without moving it. Prices start from £350. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- We come to you, anywhere in the UK
- Every repair guaranteed for a year
- Colour mixed on the day to match
- Same prices wherever you are
Take a look at our prices page and resurfacing vs replacement cost guide.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
About our accreditations · Every repair comes with a one-year guarantee.
