Kent · England
Bath Re-enamelling in Standen
Bath re-enamelling for Standen, without a refit. Send us pictures for a fixed quote, then book a visit.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Brown or grey marks that don’t clean off
Bath re-enamelling in Standen without replacing anything
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we do not cut corners on it. If you are dealing with a roll-top that’s seen better days and several chips and rust patches, we can help.
You get a one-year guarantee, the same in Standen as everywhere else we work.
- Where
- Standen (TN27)
- Area hub
- Kent
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Repair or replace in Standen?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not your postcode. You will see the full price before you book, with no extras added later.
Why us?
- Colours mixed by hand to suit your surface
- Accredited with CHAS, Constructionline and SafeContractor
- Dust sheets down, tidy finish
- Fixed prices from your pictures
Take a look at our pricing and guide to resurfacing and replacement costs.
How the visit works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes most of the day. If we find something your pictures didn’t show, we will explain it before carrying on.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Clear the area around the damage
- Avoid using the area for a few hours before we arrive
- Tell us about parking, stairs or access
Get a quote
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Read more
Signs you need bath re-enamelling in Standen
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
The things customers typically mention when they call include:
- An original cast iron bath that needs restoring
- Staining under the taps and around the waste
- An outdated colour you’d like to change
- Worn patches where water runs and sits
Questions to ask before booking
- How long the guarantee is and what it covers
- Whether the price is fixed and includes VAT
- How changes to the job are handled
- How the room is protected while they work
Honest limits
Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:
- Leaks from fittings rather than the bath
- A bath split right through the body
- Anything hidden under an old coating, until we remove it
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
How we price bath re-enamelling
Resurfacing from £350. We price every job individually, from your pictures. What matters most is:
- The type of damage
- The colour and finish to match
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Send photos for a quote
A couple of clear pictures is all it takes. It helps if you send:
- One sharp close-up of the damage
- What it’s made of, if you know
- Natural light rather than flash
- The postcode, so we can plan the visit
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Standen and nearby
Standen is about 9 miles west of Ashford, in Kent. We agree a date that works for you, and we’ll give you an arrival time in advance, so there is no waiting around. We work in all 922 towns and villages in Kent, from the larger towns to small villages. We work right across the region, from Standen to London (about 41 miles away).
Here we cover the TN27 postcode area. Streets in the area include Smarden Road, Pook Lane and Weeks Lane. If you’re just outside Standen, we cover Curteis' Corner (1 mile south-west), Lashenden (1 mile north-west), Monk's Hill (1 mile north-east), Biddenden (1 mile south-west) and Stede Quarter (1 mile south-east). Larger places within reach include Maidstone (11 miles north-west), Ashford (9 miles east), Sittingbourne (15 miles north), Kings Hill (14 miles north-west), Foley Park (12 miles north-west) and Paddock Wood (12 miles west).
What’s near Standen
Standen’s nearest station is Headcorn station, roughly 2.6 miles north-west. A little further out are Benenden Hospital (3.5 miles south-west) and Romden Castle (2.7 miles north-east).
Also in Standen
Common questions in Standen
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
What happens after I send photos?
You get a fixed quote and available dates. If we need another angle, we will ask.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room masked and ventilated.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Do you cover Standen?
Yes. We cover the whole UK and travel to Standen. Send pictures and we’ll quote, or call 0345 017 0787.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
For landlords and businesses
Landlords, letting agents and housing providers in Standen use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
About our accreditations · Every repair comes with a one-year guarantee.
