Kent · England
Bath re-enamelling & resurfacing in Curteis' Corner, Kent
Local bath re-enamelling for Curteis' Corner: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- Worn patches where water runs and sits
How we handle bath re-enamelling in Curteis' Corner
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Typical jobs include an original cast iron bath that needs restoring and stains that won’t shift, in pressed steel baths, basins & shower trays and acrylic baths.
Whatever the size of the job, you get the same one-year guarantee.
- Area
- Curteis' Corner (TN27)
- Region
- Kent
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Curteis' Corner
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
We work for landlords, letting agents and housing providers in Curteis' Corner as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
How it works
We begin by going over the job with you, so you know exactly what we are doing. After that, protection goes down around the work area and we start. You can expect it to take a full day, and we’ll tell you if anything changes.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Tell us about any previous repairs or coatings
- Avoid using the area for a few hours before we arrive
- Let us know which floor the room is on
Ask for a price
For a price in Curteis' Corner, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
Signs you need bath re-enamelling in Curteis' Corner
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Typical reasons for a call-out include:
- Staining under the taps and around the waste
- A coloured bath you want in white
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
Before booking anyone
- How your room will be protected
- What happens if they find more damage
- How long the guarantee is and what it covers
- How long it needs to cure
Curteis' Corner questions
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
How long does re-enamelling take?
One day for most baths, ready the following day. We give you timings with the quote.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Is my repair covered?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
How much does bath re-enamelling cost in Curteis' Corner?
Prices start from £350. Because every job differs, we price from pictures. You’ll get a fixed figure before you book.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day.
Can you quote from pictures?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
What do you need from me?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Curteis' Corner and nearby
Curteis' Corner is about 10 miles west of Ashford, in Kent. Across the TN27 area, we come to you. Our repair technicians cover all 922 towns and villages across Kent. Our nearest city page is London, about 41 miles away.
Our visits in TN27 are booked in the same way as anywhere else. We regularly work on streets such as Headcorn Road, Smarden Road and Cot Lane and the roads around them. If you’re just outside Curteis' Corner, we cover Standen (1 mile north-east), Biddenden (1 mile south-west), Lashenden (1 mile north), Stede Quarter (1 mile south-east) and Hareplain (1 mile west). Further out, we also cover Maidstone (11 miles north-west), Ashford (10 miles east), Kings Hill (15 miles north-west), Foley Park (12 miles north-west), Paddock Wood (12 miles west) and Tenterden (4 miles south-east).
Around Curteis' Corner
Locally, our jobs take us to homes close to The Red Lion Inn, Parish Church of All Saints and John Mayne Church of England Primary School and the streets around them. The nearest railway station is Headcorn station, about 2.9 miles north. Nearby you’ll also find Sissinghurst Castle (3 miles west) and Benenden Hospital (3 miles south-west).
Places near Curteis' Corner
Also in Curteis' Corner
When a repair isn’t the answer
We will always be straight with you, so here’s what a repair can’t fix:
- A bath that is rusted through
- Leaks from fittings rather than the bath
- A metal bath with a through crack
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
Prices and what affects them
Resurfacing from £350. There’s no charge for travel to Curteis' Corner. The price comes down to:
- How much damage there is
- How many items we do on one visit
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
How to get a fixed quote
A couple of clear pictures is all it takes. It helps if you send:
- A wider photo showing the whole bath
- Any earlier repairs or coatings
- What it’s made of, if you know
- Where you are, by postcode
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Should you replace it?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Our prices are the same across the UK, so there’s no premium for Curteis' Corner. The job itself decides the price: the material, the amount of damage and how many items.
Why Curteis' Corner clients choose us
- Most jobs done in one visit
- Work done at your home or business
- We leave the room as we found it
- Accredited with CHAS, Constructionline and SafeContractor
See our prices page or guide to resurfacing and replacement costs.
Keeping it looking good
So the finish stays in good condition:
- Have chips seen to early
- Keep suction mats out of the bath
- A quick wipe after use keeps limescale away
- Repair dripping taps early
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
About our accreditations · Every repair comes with a one-year guarantee.
