Staffordshire · England
Bath Re-enamelling for Birchmoor homes
Fixed-price bath re-enamelling in Birchmoor and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- A coloured bath you want in white
- Stains that will not shift
Bath re-enamelling in Birchmoor, done in place
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. We work on Victorian roll-tops, pressed steel baths and basins & shower trays, and people most often call us about brown or grey marks that don’t clean off and an original cast iron bath that needs restoring.
All our work is covered by a one-year guarantee.
- Area
- Birchmoor (B78)
- Region
- Staffordshire
- Guarantee
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Signs you need bath re-enamelling in Birchmoor
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
These are the problems we are asked about most:
- Wear marks under the taps
- Staining under the taps and around the waste
- Several chips and rust patches
- A coloured bath you want in white
What your quote should include
- What the guarantee covers, and for how long
- Aftercare advice
- Whether the colour is mixed to match
- How your room will be protected
Nearby places to Birchmoor
Also in Birchmoor
About Birchmoor
Birchmoor is about 2 miles south-east of Tamworth, in Staffordshire. Customers in Birchmoor get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. We cover all 512 towns and villages in Staffordshire, from the larger towns to small villages. You can also see our page for Birmingham, about 15 miles away.
All of B78 is covered, from the main roads to the quietest streets. From New Street, Green Lane and Cockspur Street or anywhere nearby, a technician can come to you. If you’re just outside Birchmoor, we cover Polesworth (1 mile north-east), Dordon (1 mile south-east), Stonydelph (1 mile north-west), Wilnecote (2 miles west) and Alvecote (2 miles north). Within a short drive, we also cover Burton upon Trent (13 miles north), Lichfield (10 miles north-west), Burntwood (13 miles west), Horninglow (15 miles north), Stowe (10 miles north-west) and Norton Canes (15 miles west).
What’s near Birchmoor
Our clients here include homes close to The Polesworth School, Birchwood Primary School and St John and the streets around them. For rail, the closest station is Polesworth station, about 1.4 miles north-east. Other landmarks nearby include Sir Robert Peel Community Hospital (4 miles west) and Tamworth Castle (3.1 miles north-west). The countryside around Birchmoor includes Middleton Lakes RSPB reserve.
Landlord and trade work in Birchmoor
For anyone letting property in or around Birchmoor, we’ll quote for several properties at once. Send photos for each one and we will come back with a combined price.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- Stick to gentle, non-abrasive cleaners
- Rinse off hair dye, oils and bath bombs right away
- Leave the bath for the full curing time before using it
- Have chips seen to early
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Birchmoor: your questions answered
What happens after I send photos?
You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.
Is there any odour?
There can be some smell while we work. It clears as the materials cure.
Can you change the colour of my bath?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
How long does re-enamelling take?
One day for most baths, ready the day after. We give you timings with the quote.
Can I get a quote without a visit?
Nearly always. If pictures do not show enough, we’ll ask for another angle.
Can you re-enamel a roll-top bath?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
What information do you need?
Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.
Can you redo someone else’s repair?
Usually, yes. We remove the old repair before doing a new one, so mention it when you send pictures.
Honest limits
In fairness, some problems need a different fix:
- Plumbing leaks, which need a plumber
- A poorly supported acrylic bath, until it’s firmed up
- Problems we can’t see until an old finish comes off
Send us photos and we will tell you honestly.
Materials we work on in Birchmoor
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
The process
Arrival times are agreed in advance, so you are not left guessing. On site, it takes the best part of a day in most cases. The room is left tidy and you will know when it can be used.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Clear the area around the damage
- Let us know about parking or access
- Keep a parking space free if you can
Getting a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote the same day in most cases.
Read more
How we price bath re-enamelling
Prices start from £350. We give every job a fixed price from photos. This is what makes a difference:
- Whether old repairs or coatings need taking off
- Access to the area
- The material and finish
- How many areas need work
What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Quotes from your photos
Good pictures mean an accurate price. Here’s what we find most useful:
- Where you are, by postcode
- A wider photo showing the entire bath
- Whether it’s been repaired or coated before
- Something in shot to show the size
Most clients in Birchmoor get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
About our accreditations · Every repair comes with a one-year guarantee.
