Staffordshire · England
Bath Re-enamelling in Glascote
We travel to Glascote for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Thin, worn enamel in places
- A roll-top that is seen better days
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams in Staffordshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Landlords, letting agents and housing providers in Glascote use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
How we handle bath re-enamelling in Glascote
Resurfacing renews the entire surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. We regularly repair Victorian roll-tops, acrylic baths and basins & shower trays, and common reasons people get in touch are several chips and rust patches and staining under the taps and around the waste.
All our work is covered by our one-year guarantee, wherever you are in Staffordshire.
- Where
- Glascote (B77)
- County
- Staffordshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What bath re-enamelling costs
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- How much damage there is
- The type of damage
- Any earlier repairs that need removing first
- Whether we combine several jobs
There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Send pictures for a quote
We price nearly every job from photos. This is what we need:
- A coin beside the damage so we can judge size
- One picture of the entire bath
- Your postcode, so we can check dates
- A clear, close picture of the problem area
Email us pictures of the damage and one of the whole item, and tell us you are in Glascote, and we will come back with a fixed quote.
When to call us in Glascote
Often the bath has just had decades of use, and only the surface is worn. The body of the bath is generally perfectly sound.
You may need us if you’ve spotted:
- Wear marks under the taps
- An outdated colour you’d like to change
- A bath that stays dull however much you clean it
- Stains that will not shift
Before booking anyone
- How changes to the job are handled
- Who will actually do the work
- How long the guarantee is and what it covers
- How long it needs to cure
More services for Glascote
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Your questions about bath re-enamelling in Glascote
Will there be fumes?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Do you come to Glascote?
We do. We send a technician to Glascote for every job, and the price is the same as everywhere else.
Which areas do you work in?
Everywhere in the UK, Glascote included. There is no extra charge for travel.
Can tenants book a repair?
Of course. Check with your landlord; we can send the quote to them too.
How much does bath re-enamelling cost in Glascote?
Prices start from £350. We give a fixed price from your photos. Send a close-up and a picture of the whole item and your postcode.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Respect the curing time we give you
- Do not leave bottles, razors or sponges standing on the surface
- Clean with a soft cloth and mild detergent
- Avoid suction-cup mats
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Glascote and nearby
Glascote is about 1 mile south-east of Tamworth, in Staffordshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Glascote is one of 512 towns and villages in Staffordshire we cover. Our nearest city page is Birmingham, about 14 miles away.
All of B77 is covered, from the main roads to the quietest streets. You will find streets such as Abbey Road, Davis Road and Torc Avenue, and we cover them all. Main roads around Glascote include the A5, which makes travel easy. If you’re just outside Glascote, we cover Belgrave (1 mile south-west), Tamworth (1 mile north-west), Stonydelph (1 mile south-east), Bolehall (1 mile west) and Amington (1 mile north-east). Within a short drive, we also cover Burton upon Trent (13 miles north), Cannock (15 miles west), Lichfield (8 miles north-west), Rugeley (15 miles north-west), Burntwood (11 miles west) and Hednesford (15 miles north-west).
What’s near Glascote
Typical jobs here are in homes near St Peter's Community Church, Lakeside Primary School and Landau Forte Academy and the streets around them. The nearest railway station is Wilnecote station, roughly 1.1 miles south-west of the centre. A little further out are Sir Robert Peel Community Hospital (2.4 miles west) and Ankerside Shopping Centre (1.2 miles north-west). For a walk, there’s Middleton Lakes RSPB reserve.
What we can’t put right
In fairness, there are a few things a repair won’t fix:
- Anything hidden under an old coating, until we remove it
- Holes rusted through the metal
- Leaks from fittings rather than the bath
If in doubt, send photos and we’ll say what we think.
What we work on
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
What happens on the day
Visits start with a quick look at the job together, so you know exactly what we are doing. Next, we cover and mask everything nearby and the work begins. You can expect it to take a full day.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Mention any earlier repairs or resurfacing
- Tell us if there are stairs or a lift
How to get a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and you’re under no obligation.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
