Staffordshire · England
Bath re-enamelling & resurfacing in Wilnecote, Staffordshire
Local bath re-enamelling for Wilnecote: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- Thin, worn enamel in places
About our bath re-enamelling in Wilnecote
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. We’re often asked to fix several chips and rust patches and a period or roll-top bath worth keeping, in acrylic baths, pressed steel baths and cast iron baths.
All our work comes with a one-year guarantee, wherever you are in Staffordshire.
- Where
- Wilnecote (B77)
- Area hub
- Staffordshire
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What we are called out for in Wilnecote
Frequently the bath has just had decades of use, and only the surface is worn. Underneath, a cast iron or steel bath is typically as strong as ever.
Contact us if you’ve noticed:
- A dull, rough surface that won’t come clean
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
- Thin, worn enamel in places
Questions to ask before booking
- A fixed price, and whether VAT is included
- What protection goes down before work starts
- Aftercare advice
- Whether there are any call-out or travel charges
What else we do in Wilnecote
What happens on the day
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes a full day. If we find something your pictures didn’t show, we will explain it before carrying on.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Mention any earlier repairs or resurfacing
- Clear the area around the damage
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Related advice
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
How we price bath re-enamelling
Resurfacing from £350. We give every job a fixed quote from pictures. These are the things that affect it:
- Access to the area
- Whether we combine several jobs
- The material
- Whether it’s a chip, crack, burn or wear
We charge the same wherever you are, so there’s no premium for Wilnecote. What changes the price is the job itself: the material, the amount of damage and how many items.
Send photos for a quote
A couple of clear pictures is all it takes. It helps if you send:
- Whether it’s been repaired or coated before
- A clear, close picture of the problem area
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Covering Wilnecote
Wilnecote is about 2 miles south of Tamworth, in Staffordshire. We visit customers in Wilnecote and the surrounding area, so nothing has to leave your home. We cover 512 places across Staffordshire. Our nearest city page is Birmingham, about 13 miles away.
We work across B77. Whether you live on Leven Road, Arden Road and Lagoon Road or anywhere nearby, a technician can come to you. We also cover the places around Wilnecote: Belgrave (1 mile north), Stonydelph (1 mile north-east), Glascote (1 mile north), Bolehall (1 mile north-west) and Tamworth (2 miles north). Further out, we also cover Burton upon Trent (14 miles north), Lichfield (8 miles north-west), Rugeley (15 miles north-west), Burntwood (12 miles north-west), Horninglow (15 miles north) and Stowe (9 miles north-west).
Near you in Wilnecote
Typical jobs here are in homes near The Wilnecote School, Queen's Head Inn Public House and Tamworth Enterprise College and the streets around them. Also close by are Wilnecote Junior School (under half a mile south-east) and Church of Holy Trinity (within half a mile north). For rail, the closest station is Wilnecote station, roughly 0.5 miles west of the centre. A little further out are Tamworth Castle (2.1 miles north-west) and The Bryans Museum (1.9 miles west). Not far away are Middleton Lakes RSPB reserve.
Landlord and trade work in Wilnecote
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
We’re used to working with agents and managing companies. Send the address, pictures and access details and we’ll arrange it.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Questions from Wilnecote
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send photos of everything you’d like done.
Do the materials smell?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Will the bath be moved?
Not at all. We work on the bath in place, with the room protected and ventilated.
How do I get a price for bath re-enamelling in Wilnecote?
Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Are there extra charges for Wilnecote?
There is no separate call-out charge. Your fixed price includes everything.
Will there be fumes?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Repairing versus replacing in Wilnecote
A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing gives the bath a new finish without moving it. Resurfacing from £350, with every job priced individually. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
What you get with us
- Everything repaired in place
- Colours mixed by hand to suit your surface
- CHAS, Constructionline and SafeContractor accredited
- Technicians who travel to you, UK-wide
Read our prices page and guide to resurfacing and replacement costs.
When a repair is not the answer
In fairness, some problems need a different fix:
- Plumbing leaks, which need a plumber
- A bath that’s rusted through
- An acrylic bath that flexes badly underfoot
Send us photos and we’ll tell you honestly before booking.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
