Lancashire · England
Bath re-enamelling & resurfacing in Swillbrook, Lancashire
Bath re-enamelling for Swillbrook, without a refit. Send us pictures for a fixed price, then we come to you.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Worn patches where water runs and sits
About our bath re-enamelling in Swillbrook
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Common call-outs are for a bath that stays dull however much you clean it and chips and rust in more than one place, on cast iron baths, basins & shower trays and pressed steel baths.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Location
- Swillbrook (PR4)
- County
- Lancashire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Questions from Swillbrook
How soon can you come?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
What information do you need?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Lancashire.
Do you cover Swillbrook?
Yes. We work across the UK and come to Swillbrook. Send photos and we will quote, or call 0345 017 0787.
How long does re-enamelling last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
How long is the bath unusable?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
When we would advise against a repair
A few problems are outside what a surface repair can do:
- A cast iron or steel bath that’s cracked right through
- An acrylic bath that flexes badly underfoot
- Plumbing leaks, which need a plumber
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
Where we work around Swillbrook
Swillbrook is about 3 miles north-west of Fulwood, in Lancashire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our repair technicians cover all 482 towns and villages across Lancashire, from the larger towns to small villages. You can also see our page for Liverpool, about 28 miles away.
Here we cover the PR4 postcode area. From Crown Lane, Catforth Road and Rosemary Lane or anywhere nearby, a technician can come to you. We also travel to Blackleach (1 mile west), Catforth (1 mile north-west), Black Pole (1 mile north), Woodplumpton (1 mile east) and Lewth (1 mile north). Within a short drive, we also cover Preston (5 miles south-east), Chorley (12 miles south-east), Lytham St Anne's (10 miles west), Bamber Bridge (7 miles south-east), Leyland (8 miles south-east) and Fulwood (3 miles south-east).
Local landmarks in Swillbrook
Locally, our jobs take us to homes close to St Anne's Church, The Bay Horse pub and Catforth Primary School and the streets around them. The closest station to Swillbrook is Salwick station, roughly 2.1 miles south-west of the centre. Further afield, we also cover the area around Church Cottage (2.8 miles east) and Royal Preston Hospital (3.3 miles east).
Prices and what affects them
Resurfacing from £350. You will not pay by the hour. The price is based on:
- Any earlier repairs that need removing first
- Where the damage is and how we get to it
- How many items we do on one visit
- How many areas need work
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed quote
You can take the pictures on your phone, there’s no need for anything special. Just make sure we can see:
- A clear, close picture of the problem area
- What it’s made of, if you know
- Natural light rather than flash
- A picture taken from further back
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Work for landlords and builders
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Repair or replace: which is better?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
What you get with us
- Most jobs done in one visit
- Straight answers about what a repair can do
- A year’s guarantee on all work
- Fixed prices from your photos
Take a look at our prices page or guide to resurfacing and replacement costs.
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Stick to gentle, non-abrasive cleaners
- Get any chip repaired quickly
- Respect the curing time we give you
- Do not let dyes or oils sit on the finish
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Towns and villages near Swillbrook
More services for Swillbrook
What we’re called out for in Swillbrook
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
People typically call us after spotting one of these:
- Lots of chips and rust spots
- A coloured bath you want in white
- A roll-top that is seen better days
- Wear marks under the taps
What to look for in a quote
- Whether the price is fixed and includes VAT
- How your room will be protected
- How changes to the job are handled
- What aftercare is recommended
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
What happens on the day
Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a full day, and we finish by cleaning up and talking you through the result.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can normally be used the next day.
Before we arrive
- Keep children and pets away from the room on the day
- Have a window or extractor fan available
- Move bottles, mats and clutter away from the area
Getting a price
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed price. There’s no charge for the quote and you are under no obligation.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
