Lancashire · England
Bath Re-enamelling in Cuddy Hill
Our repair technicians come to Cuddy Hill for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Wear marks under the taps
- An old resurfacing that’s failing
What we do, step by step
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes a full day. If anything looks different from your pictures, we’ll talk to you before going ahead.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can usually be used the following day.
Before we arrive
- Open a window if you can
- Avoid using the area for a few hours before we arrive
- Keep pets and children out of the room while we work
Ask for a price
If you are in Cuddy Hill and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Advice
How we handle bath re-enamelling in Cuddy Hill
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the day after. We work on pressed steel baths, Victorian roll-tops and basins & shower trays, and the jobs we see most are a dull, rough surface that won’t come clean and wear marks under the taps.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Where
- Cuddy Hill (PR4)
- County
- Lancashire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Cuddy Hill and the surrounding area
Cuddy Hill is about 4 miles north-west of Fulwood, in Lancashire. Anywhere in PR4, a technician comes to you. We work in 482 places in Lancashire. We work right across the region, from Cuddy Hill to Liverpool (30 miles away).
Postcode districts we cover here: PR4. Jobs here include addresses on Benson's Lane and Eaves Lane. Other places close to Cuddy Hill include Black Pole (1 mile south), Lewth (1 mile south-west), Newsham (1 mile south-east), Woodsfold (1 mile south-west) and Barton (1 mile east). Within a short drive, we also cover Preston (5 miles south-east), Lancaster (15 miles north), Chorley (14 miles south-east), Lytham St Anne's (11 miles south-west), Bamber Bridge (8 miles south-east) and Leyland (10 miles south).
Around Cuddy Hill
Around Cuddy Hill, we work in homes near The Plough at Eaves pub and Broughton High School. The closest station to Cuddy Hill is Salwick station, roughly 4.1 miles south-west of the centre. Well-known places in the area include Royal Preston Hospital (3.7 miles south-east) and Greenhalgh Castle (4.6 miles north).
How we price bath re-enamelling
Prices start from £350. Every quote is fixed and free. What we look at:
- The size and number of damaged areas
- Whether we combine several jobs
- What kind of damage it is
- The material and finish
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Getting a price from pictures
You can normally get a fixed price without us visiting. To make it quick:
- Whether it’s been repaired or coated before
- What it’s made of, if you know
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Towns and villages near Cuddy Hill
More services for Cuddy Hill
Landlord and trade work in Cuddy Hill
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
We regularly work with letting and managing agents. Send the address, pictures and access details.
Signs you need bath re-enamelling in Cuddy Hill
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Common reasons people in Cuddy Hill contact us are:
- A coating lifting around the plughole
- A dull, rough surface that won’t come clean
- A period or roll-top bath worth keeping
- Staining under the taps and around the waste
Questions to ask before you book
- Whether a trained technician does the job
- What prep work is covered
- How your room will be protected
- If travel is included in the price
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- Holes rusted through the metal
- A poorly supported acrylic bath, until it’s firmed up
- Leaks from fittings rather than the bath
Send us photos and we will tell you honestly.
Materials we work on in Cuddy Hill
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Your questions about bath re-enamelling in Cuddy Hill
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
Is repairing better than replacing?
Generally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Can you redo someone else’s repair?
In most cases. The old repair comes out first.
How do I get a price for bath re-enamelling in Cuddy Hill?
Resurfacing from £350. Every job gets a fixed price from your photos. Send a close-up and a photo of the entire item and your postcode.
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
How quickly can you book me in?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Why repair rather than replace?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Our bath re-enamelling starts from £350. Compared with replacing, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why book with us
- Straight answers about what a repair can do
- Nothing taken out or refitted
- Work done at your home or business
- One-year guarantee on every repair
See our prices page and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
