Staffordshire · England
Bath Re-enamelling in Rangemore
Problem with your bath in Rangemore? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Chips and rust in more than one place
- Stains that won’t shift
Bath re-enamelling at your home in Rangemore
Re-enamelling is a one-day job for most baths, and you can use the bath the next day. Nothing is disconnected or removed. We regularly repair Victorian roll-tops, cast iron baths and pressed steel baths, and common reasons people contact us are a coloured bath you want in white and chips and rust in more than one place.
Whatever the size of the job, you get the same one-year guarantee in Rangemore and across Staffordshire.
- Where
- Rangemore (DE13)
- Area hub
- Staffordshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Looking after it afterwards
Simple care helps the repair last. We recommend:
- A dripping tap should be fixed promptly
- Do not use the bath until it has fully cured
- Do not leave bottles, razors or sponges standing on the surface
- Dry the bath after use to stop limescale
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
Other services in Rangemore
When we would advise against a repair
A few problems are outside what a surface repair can do:
- Plumbing leaks, which need a plumber
- A metal bath with a through crack
- Anything hidden under an old coating, until we remove it
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
What happens on the day
On the day itself, there’s little for you to do. Let us in and show us the room, and we will get on with it. The job generally runs to a full day, including clearing up.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the next day.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Tell us if there are stairs or a lift
- Make sure the area is dry
Ask for a price
Most customers in Rangemore get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
Rangemore and the surrounding area
Rangemore is about 4 miles west of Burton upon Trent, in Staffordshire. Our technicians come to homes and businesses in Rangemore, so you do not need to take anything anywhere. We cover 512 places across Staffordshire. You can also see our page for Birmingham, about 24 miles away.
Our repair technicians cover all of the DE13 postcode area. Local streets include Tatenhill Lane, Chapel Lane and Rangemore Hill, all of which we cover. Nearby, we also work in Anslow Gate (2 miles north-east), Blackbrook (2 miles north), Woodend (2 miles north), Hanbury Woodend (3 miles north) and Hoar Cross (3 miles west). Further out, we also cover Burton upon Trent (4 miles east), Tamworth (12 miles south), Cannock (14 miles south-west), Lichfield (9 miles south-west), Rugeley (9 miles west) and Burntwood (12 miles south-west).
Landmarks near Rangemore
Typical jobs here are in homes near Church of All Saints, John Taylor Free School and All Saints CofE (C) Primary School. The closest station to Rangemore is Burton-On-Trent station, about 3.7 miles east of the centre. Other landmarks nearby include Tutbury Castle (4.4 miles north) and Barton Under Needwood Cottage Hospital (2.8 miles south). For a walk, there’s Brankley Pastures.
Do you need bath re-enamelling in Rangemore?
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
Signs it’s time to call us include:
- Enamel that’s lost its shine and feels rough
- A coloured bath you want in white
- A coating lifting around the plughole
- Brown or grey marks that do not clean off
Comparing quotes
- How the room is protected while they work
- Who will actually do the work
- Whether there are any call-out or travel charges
- Whether the price is fixed and includes VAT
Prices and what affects them
Prices start from £350. We give every job a fixed price from pictures. These are the things that affect it:
- The material and finish
- Whether we combine several jobs
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before you book.
Quotes from your photos
We price nearly every job from photos. This is what to send:
- What it’s made of, if you know
- Details of any past repairs
- A close-up of the damage, in focus
- Daylight if possible, and no flash reflection
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Common questions in Rangemore
Can I get a quote without a visit?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
When can you do it?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
How long does re-enamelling take?
One day for most baths, ready the day after. We give you timings with the quote.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Landlord and trade work in Rangemore
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
We’re used to working with agents and managing companies. Send the address, pictures and access details and we’ll arrange it.
About our accreditations · Every repair comes with a one-year guarantee.
