Gateshead · England
Bath Re-enamelling in Blackfell
Bath re-enamelling for Blackfell, without a refit. Get a fixed quote from your photos, then we come to you.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Wear marks under the taps
How we handle bath re-enamelling in Blackfell
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. We are frequently asked to fix a period or roll-top bath worth keeping and chips and rust in more than one place, in pressed steel baths, Victorian roll-tops and basins & shower trays.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Where
- Blackfell (NE37, NE38, DH3)
- County
- Gateshead
- Warranty
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
When we would advise against a repair
Not everything can be repaired, and we’d rather say so up front. We cannot fix:
- Holes rusted through the metal
- A metal bath with a through crack
- Acrylic that moves when you stand in it
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we repair
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
Landlords, agents and businesses in Blackfell
If you manage property in Blackfell, we’ll quote for several properties at once. Just send photos for each address and we will come back with a combined price.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Blackfell and the surrounding area
Blackfell is about 1 mile north-west of Washington, in Gateshead. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in 49 places across Gateshead, from the larger towns to small villages. Our jobs stretch from Blackfell to Newcastle upon Tyne (7 miles away).
Here we cover the NE37, NE38 and DH3 postcode area. From Raby Road, Tilley Road and Donkin Road or anywhere nearby, a technician can come to you. Blackfell sits on or near the A194(M), which makes travel easy. We also cover the places around Blackfell: Albany (1 mile north-east), Springwell (1 mile north), Concord (1 mile north-east), Washington Village (1 mile east) and Eighton Banks (1 mile north-west). Further out, we also cover Gateshead (3 miles north-west), Blaydon (8 miles north-west), Dunston (5 miles north-west), Whickham (6 miles north-west), Ryton (9 miles north-west) and Winlaton (8 miles north-west).
Local landmarks in Blackfell
We visit homes around Oxclose Church, Washington School and Blackfell Primary School. The nearest railway station is Heworth station, about 3.2 miles north of the centre. Well-known places in the area include Galleries Shopping Centre (0.7 miles south-east) and Bowes Railway (1.1 miles north-west). For a walk, there’s WWT Washington.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Towns and villages near Blackfell
Also in Blackfell
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Questions from Blackfell
Will the price change on the day?
The price is fixed for what the pictures show. If there’s more, we will tell you before starting.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How much does bath re-enamelling cost in Blackfell?
Prices start from £350. Because every job differs, we price from photos. You’ll get a fixed figure before you book.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Can you quote from photos?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
How long will the bath be out of use?
One day for most baths, ready the next day. We give you timings with the quote.
How it works
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which usually takes most of the day. If anything looks different from your pictures, we’ll talk to you before going ahead.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can usually be used the day after.
Preparing for the visit
- Tell us if there are stairs or a lift
- Keep children and pets away from the room on the day
- Let the surface dry out before the visit
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You will get a fixed quote, not an estimate.
Advice
What affects the price in Blackfell
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
- The size and number of damaged areas
- Whether we combine several jobs
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
You can usually get a fixed price without us visiting. To help us price it:
- What it’s made of, if you know
- Details of any past repairs
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
When to call us in Blackfell
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Most people get in touch after spotting one of these:
- A coloured bath you want in white
- A roll-top that is seen better days
- A coating lifting around the plughole
- Enamel that’s lost its shine and feels rough
Before booking anyone
- Is the price fixed, and does it include VAT?
- Whether a trained technician does the job
- The length of the guarantee and what it covers
- Aftercare advice
Looking after it afterwards
Simple care helps the repair last. We recommend:
- Do not leave a chip unrepaired
- Repair dripping taps early
- Respect the curing time we give you
- Use washing-up liquid and a soft cloth
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
About our accreditations · Every repair comes with a one-year guarantee.
