Sunderland · England
Bath Re-enamelling for Washington Village homes
Full bath re-enamelling and resurfacing in Washington Village, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A coating lifting around the plughole
Bath re-enamelling at your home in Washington Village
We don’t move the bath, so the taps, tiles and plumbing aren’t touched. It usually takes one visit, with the bath ready to use the following day. Whether it’s a coating lifting around the plughole and worn patches where water runs and sits, we can help, on pressed steel baths, acrylic baths and Victorian roll-tops alike.
Every repair is covered by a one-year guarantee, wherever you are in Sunderland.
- Area
- Washington Village (NE38, NE37)
- Area hub
- Sunderland
- Warranty
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Common questions in Washington Village
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Will there be a smell?
Some materials have a smell while they’re applied. It fades as everything cures.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
What information do you need?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Are there extra charges for Washington Village?
Travel is included in the price, with the same prices everywhere we work.
What happens next?
We review the pictures and send a fixed quote with dates.
How we price bath re-enamelling
Resurfacing from £350. We do not charge extra for travel to Washington Village. The price comes down to:
- How many items we do on one visit
- What the surface is made of
- How hard the colour is to match
- How much damage there is
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.
How to get a fixed quote
Two or three clear pictures are typically enough. Try to include:
- Any earlier repairs or coatings
- Any details about the material
- Natural light rather than flash
- The postcode, so we can plan the visit
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.
What we can’t put right
We will not take on work that won’t last, so here’s what a repair can’t put right:
- An acrylic bath that flexes badly underfoot
- Plumbing leaks, which need a plumber
- Anything hidden under an old coating, until we remove it
Send us pictures and we will tell you honestly before booking.
Materials we repair
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Pressed steel baths
About Washington Village
Washington Village is about 1 mile north-east of Washington, in Sunderland. From the centre of Washington Village to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Washington Village is one of 75 towns and villages in Sunderland where we work. Our jobs stretch from Washington Village to Newcastle upon Tyne (8 miles away).
We work across NE38 and NE37. Local streets include Abbey Road, Spout Lane and The Avenue, and we cover them all. Washington Village is on the A195 and A1231, which makes it straightforward to reach. We also travel to Concord (1 mile north), Albany (1 mile north-west), Blackfell (1 mile west), Usworth (2 miles north) and Springwell (2 miles north-west). We also work in nearby towns such as Sunderland (5 miles east), Houghton-le-Spring (4 miles south-east), Sunniside (6 miles east), Fulwell (6 miles east), Hendon (6 miles east) and Ford (4 miles east).
Local landmarks in Washington Village
We visit homes around Washington Academy, St Joseph's Catholic Primary School and Washington School, among other places. The closest station to Washington Village is Heworth station, about 3.8 miles north-west of the centre. Well-known places in the area include Lambton Castle (2.5 miles south) and Queen Elizabeth Hospital (3.5 miles north-west). Open spaces near Washington Village include Warden Law and WWT Washington.
Common problems we fix in Washington Village
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Typical reasons for a call-out include:
- An outdated colour you’d like to change
- Several chips and rust patches
- Worn patches where water runs and sits
- Stains that will not shift
What to look for in a quote
- Whether the price is fixed and includes VAT
- What happens if the damage is worse than the photos show
- Whether a trained technician does the job
- What aftercare is recommended
Landlords, agents and businesses in Washington Village
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
How it works
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we are doing. It typically takes the best part of a day, and you can get on with other things while we’re there.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can normally be used the day after.
Preparing for the visit
- Have a window or extractor fan available
- Have somewhere for us to park nearby if possible
- Clear toiletries, mats and anything else from around the area
Get a quote
If you’re in Washington Village and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Read more
How to look after the repair
Much of the damage we repair could have been avoided. A few tips:
- Do not use the bath until it has fully cured
- A quick wipe after use keeps limescale away
- Don’t let dyes or oils sit on the finish
- Get any chip repaired quickly
Dry the bath after use if possible, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Repair or replace: which is better?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Our bath re-enamelling starts from £350. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Why choose Surface Doctor in Washington Village
- No need to remove anything
- We come to you, anywhere in the UK
- We’ll tell you if it’s not worth repairing
- Colours mixed by hand to suit your surface
Take a look at our prices page or bath cost comparison.
Nearby places to Washington Village
Other services in Washington Village
About our accreditations · Every repair comes with a one-year guarantee.
