Glasgow · Scotland
Bath Re-enamelling for Blairdardie homes
Full bath re-enamelling and resurfacing at your home in Blairdardie, with a one-year guarantee on every repair.
- Resurfacing from £350
- Thin, worn enamel in places
- Lots of chips and rust spots
Bath re-enamelling in Blairdardie without replacing anything
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we do not cut corners on it. If you are dealing with enamel that’s lost its shine and feels rough and a bath in a colour that no longer suits, we can generally put it right.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Blairdardie (G13, G15, G61)
- Area hub
- Glasgow
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What we cannot put right
A repair is not right for every job, for example:
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
- Problems we cannot see until an old finish comes off
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
Why repair rather than replace?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
What you get with us
- A fixed quote before you book
- We come to you, anywhere in the UK
- Same prices wherever you are
- CHAS, Constructionline and SafeContractor accredited
Read our prices page or guide to resurfacing and replacement costs.
Towns and villages near Blairdardie
More services for Blairdardie
Where we work around Blairdardie
Blairdardie is about 2 miles south-west of Bearsden, in Glasgow. Jobs in Blairdardie are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. We cover 183 places across Glasgow.
All of G13, G15 and G61 is within our area, from the main roads to the quietest streets. Jobs here include addresses on Mace Road, Fruin Road and Manor Road. Other places close to Blairdardie include Drumchapel (1 mile north-west), Old Drumchapel (1 mile west), Westerton (1 mile north-east), Linnvale (1 mile west) and Drumry (1 mile west). We also work in nearby towns such as Glasgow (5 miles south-east), Hillhead (3 miles south-east), Dowanhill (3 miles south-east), Woodlands (4 miles south-east), Woodside (4 miles south-east) and North Kelvinside (3 miles south-east).
Near you in Blairdardie
We visit homes around Knightswood Secondary School, Jordanhill College and St David's Parish Church. Blairdardie has its own railway station: Drumchapel station. Further afield, we also cover the area around Drumchapel Hospital (under half a mile north) and Braehead (1.8 miles south). The countryside around Blairdardie includes Castle Hill and Kilmardinny.
What bath re-enamelling costs
Prices start from £350. There’s no charge for travel to Blairdardie. The price depends on:
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- How easy the damage is to reach
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Quotes from your pictures
Two or three clear pictures are usually enough. Try to include:
- A clear, close picture of the problem area
- Your postcode, so we can check dates
- Details of any past repairs
- The material, if you know it
If you’re in Blairdardie and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
The process
Arrival times are agreed in advance. On site, it takes a full day. The room is left tidy and you’ll know when it can be used.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Point us to the nearest place to park
- Clear the area around the damage
- Let us know which floor the room is on
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
Related advice
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
We regularly work with letting and managing agents. Send the address, photos and access details.
Common problems we fix in Blairdardie
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Send us a picture if you notice any of these:
- Brown or grey marks that don’t clean off
- A period or roll-top bath worth keeping
- Wear marks under the taps
- Enamel that is lost its shine and feels rough
Before booking anyone
- Whether cleaning and preparation are in the price
- How to look after the finish
- Is the price fixed, and does it include VAT?
- How long it needs to cure
Keeping it looking good
Aftercare is simple:
- Stick to gentle, non-abrasive cleaners
- Don’t use the bath until it has fully cured
- Wipe the bath dry after use in hard water areas
- Get any chip repaired quickly
A quick rinse and wipe after use helps, particularly where water is hard, so limescale cannot build up.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Common questions in Blairdardie
Which areas do you work in?
Everywhere in the UK, Blairdardie included. Travel is included in the price.
Can tenants book a repair?
We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Can you price it without visiting?
Nearly always. If photos don’t show enough, we’ll ask for another angle.
Are there extra charges for Blairdardie?
Travel is included in the price, with the same prices everywhere we work.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
About our accreditations · Every repair comes with a one-year guarantee.
